Stainless Steel Mixing Bowl, 16 quart, Marin Restaurant Supply - A Division of Dvorson's Food Service Equipment Inc.

Categories

  Bakery
  Barbeque Grills ›
  Blenders ›
  Char Broilers ›
  Crepe Makers ›
  Cleaners + Paint
  Coffee & Tea ›
  Commercial Ranges ›
  Convection Ovens ›
  Cookware ›
  Cutlery + Knives ›
  Dishwashers
  Dual Fuel Range Stoves
  Equipment Stands
  Faucets + Fittings
  Flatware ›
  Food Preparation
  Food Safety
  Food Warmers
  Griddles ›
  Hoods, Range
  Ice Cream Equipment ›
  Juicers and Sectioners
  Kitchen Appliances
  Mixers
  Panini Grills ›
  Pizza Ovens
  Refrigeration ›
  Replacement Parts ›
  Residential Ranges and Hoods ›
  Seating ›
  Shelving and Storage ›
  Sinks and Handsinks ›
  Slicers
  Steamers
  Teppanyaki Cooking ›
  Toasters
  Ventless Cooking
  Waffle Makers ›
  Wolf Range Stoves ›

Manufacturers

Shopping Cart

1 x	Switch, Fan control switch for Montague Convection Ovens
1 x	Pilot Assembly for 2 Left hand Open Burners on WOLF Challenger
1 x	Pilot Tube 3/16 diameter, 24 inch incl. pilot head
1 x	Thermocouple 30" capillary
1 x	Oven Rack for W or V Series (30 inch oven)
1 x	Oven Thermostat, W or V Series Economy/Medium Duty
1 x	Knob for Vulcan Cheesemelters, Oven, Salamander (certain models)
1 x	Oven Door Handle, 25 inch length, steel (Montague)
1 x	Front Burner Grate
1 x	Orifice for DVOR-1422 valve, for Stock Pot Ranges, Nat. Gas
1 x	Pilot burner for Montague Ovens, Broilers
1 x	Orifices, Jets for top burner valve, natural gas, 6 pack
1 x	Knob, dial, griddle control, IR models (Imperial)
1 x	Pilot Burner Assembly, Propane - LP gas
1 x	Grate for ACB, Cast Waffle Grate for Char Broilers
1 x	Motor, convection motor assembly for WKGD Ovens, VC ovens
1 x	Safety Valve for 136, V136 series (Montague)
1 x	Oven Thermostat for Montague
1 x	Oven Rack, for Montague 115, HX63, R85, EK15, etc
1 x	Elbow, male elbow, 3/8 inch to 3/8
1 x	Open Top Pilot Assembly (2 burner, RHP/AHP series, 3/16 inch tub
1 x	Safety Valve for Grizzly/Vectaire, 3/8" gas in/out (Montague)
1 x	Grate, UF Series Char Broiler TOP Grate
1 x	Flame Switch for electronic ignition, Wolf Range Challenger etc.
1 x	Orifice Propane (LP), for DVOR-1535 pilot burner
1 x	Open Top Pilot Assembly: 2 burner (Commander)
1 x	Knob for Grizzly Series Ranges/Ovens (Montague)
1 x	Knob for Imperial Fryers, IF, IR, IHR series, etc.
1 x	Oven Rack for Wolf Challenger Range (Prior to 1989 models)
1 x	Fan Switch with Toggle Motion, Commander and Challenger Series,
1 x	Grate for ACB, Diamond-shape Stainless Grate
1 x	Front Venturi, Challenger, 7.5 inch length
1 x	Grate for ACB or VACB char broilers, cast iron diamond
1 x	Orifice for DVMG-5309 valve, propane (Montague)
1 x	Grate for ACB or VACB char broilers, cast straight
1 x	Knob D for Wolf Range Cooking Equipment, Red
1 x	Safety Valve, 3/8 gas in/out (Montague)
1 x	Pilot Tube 3/16 diameter, 24 inch incl. pilot head
1 x	Pilot Burner, flame pattern left, natural gas, 1/4 cct
1 x	Logo Emblem, Wolf
1 x	Safety Valve, for Montague Pizza Ovens MP
1 x	Thermostat, Safety/High Limit (IFS , IR, IHR or IFP)
1 x	Pilot asembly for WTF-35 fryer (Nat/LP)
1 x	Knob for WTF-35 fryer
1 x	Solenoid Gas (Imperial)
1 x	Knob, Chrome, for Montague Range equipment
1 x	Door Hardware: Oven Door Spring (Pacific Series)
1 x	Pilot for Wolf Challenger Range Ovens (CH/CHSS)
1 x	Oven Rack for W or V Series (24 inch oven)
1 x	Knob, Chrome, for Wolf or Vulcan Broilers, etc.
1 x	Pilot Burner, Oven (standard pattern flame, orifice not included
1 x	Dynamic Hand Held Mixer, 7 inch
1 x	Knob, Flat Up on D-stem with Wolf Logo, Dark Red
1 x	Spring, Oven Door Spring
1 x	Leg 6 inch height, stainless steel for countertop equipment
1 x	Open Top Pilot Assembly*: 4 burner (Commander, etc.)
1 x	Pilot head: for 3/16" tubing
1 x	Gas Knob for Convection Ovens WKGFS
1 x	Oven Door Switch for Wolf K, KFS, KCH
1 x	Motor, convection blower motor for WKGD Ovens, VC ovens
1 x	Grease Container, Flat Top Griddle model Grizzly Ranges
1 x	Grease Container for Montague Range equipment
1 x	Element for Electric griddles by Wolf, Vulcan, Hobart
1 x	Knob, Chrome, for Montague Range equipment, no set screw (NLA)
1 x	Knob, Chrome, for Wolf or Vulcan Broilers, late models
1 x	Knob for top burners Wolf Challenger XL C36SFF models
1 x	Kobe Hood Stainless Steel Panel, 36 inch wide
1 x	Extendible Match Holder for lighting pilot flame
1 x	Lids, for 21.25 inch Opening, Stainless Steel with Insulation
1 x	Ignition Kit for IDR series
1 x	Drip Pan
1 x	Knob, Flat Up on D-stem (dark red color)
1 x	Insulation Pad for Convection Motor, Legend or Grizzly, V series
1 x	Oven Bulb (40 watt)
1 x	Orifices, Jets for Hot Top valve, natural gas, 6 pack
1 x	Grate for ACB, Round Rod Stainless Steel
1 x	Pilot Assembly, Single (CH/CHSS)
1 x	Orifices, Jets for Griddle THERMOSTAT, natural gas, 6 pack
1 x	Knob E for Wolf Range Cooking Equipment, Black
2 x	Oven Test Thermometer, NSF Certified for Commercial Use
1 x	Flex tube kit, 18 inch s/s, 1/4 diameter
1 x	Door Hinge Assembly Block, Challenger XL (left or right side)
1 x	Door Seal (LH door)
1 x	Pilot asembly for WTF-42 fryer (Nat/LP)
1 x	Leg, 6 inch leg for Wolf Range Commercial (Vulcan), Challenger X
1 x	Caster Kit for Imperial Range IR series 24, 30, 36, 48, 60 inch
1 x	Pilot head: for 1/4" Tubing
1 x	Flex tube kit, 18 inch s/s, 3/16 diameter
1 x	Screws for burners, 6 pack, for Grizzly, M, R, S, 136, VG
1 x	Fryer Basket, Twin Size
1 x	Pilot Assembly, Single (SCB, FCB, CCB)
1 x	Ra Chand Heavy Duty Lime Press
1 x	Knob, Chrome, for Montague Range 136, 236, SB, V136 Grizzly
1 x	Safety Valve for Vectaire, Montague Pizza Ovens
1 x	Knob for combination pilot safety valve
1 x	Micro Switch for ignition on Top Burner Valve, Wolf Residential
1 x	Oven Pilot Assembly, Natural gas or LP, 3/16 x 1/4
1 x	Open Top Pilot Assembly: 2 burner, RHP
1 x	Oven Rack, Wolf Commercial Pacific Series Full Size Oven Rack
1 x	Thermocouple 24" capillary for Montague Ovens
1 x	Flex tube kit, 30 inch s/s, 1/4 diameter
1 x	Front Venturi
1 x	Pilot Assembly for 2 right hand Open Burners on WOLF Challenger
1 x	Knob, Flat Up on D-stem (black color)
1 x	Pressure Regulator: LP Gas, 3/4" NPT (Montague)
1 x	Grate for ACB, Griddle Plate Accessory
1 x	Knob, pilot, 1-1/4" width
1 x	Electrode igniter kit for R series (Wolf Sub-Zero)
1 x	Orifice Jet Propane LP for Grizzly series Valve DVMG-XVLV
1 x	Door Spring Hinge Assembly for Challenger XL, Right
1 x	Pilot Assembly for 2 Center Open Burners on WOLF Challenger
1 x	Oven Rack for Wolf Challenger Heavy Duty Standard Size Rack
1 x	Leg 6 inch height, with stainless steel foot
1 x	Kobe Hood Brillia RAX094 Series (36 inch wide)
1 x	Kobe Hood Stainless Steel Panel, 30 inch wide
1 x	Grate for SCB, Cast Diamond
1 x	Door Hardware: Oven Door Spring for Wolf Challenger etc.
1 x	Open Top Burner

$16,292.07

Information

Contact Us
About Us
Our Customers
Our Location
Shipping & Returns

Twitter page for Marin Restaurant Supply: Sales and Coupons

Dvorsons.com
Wolf Stoves.com
Jade Stoves.com
THOR Stove.com
NXR Stoves.com
Dynasty Stoves.com

Manufacturer Info


-	Other products

Crepe Griddle Cleaning Pad Holder (Includes two cleaning pads)	Flat Metal Crepe Turner 14 inch, Krampouz	Repair Kit for Batter Boss
Dynamic Hand Held Mixer, 7 inch	Hot Topping Warmer, squeeze bottles included	Griddle or Grill Surface Thermometers, 150-700 degrees

$15.95

Stainless Steel Mixing Bowl, 16 quart
[MB16]

$15.95

Stainless Steel Mixing Bowl, 16 quart[MB16]

Stainless Steel Mixing Bowl, 16 quart
[MB16]