$835.00

Sunkist J-1 Commercial Citrus Juicer (Type 8)
[J-1]

Sunkist J-1 Commercial Citrus Juicer (Type 8)

Quick-Ship Item, ships same day as ordered. Now with Free Shipping. Also available for Store Pickup. Please contact us for assistance. 415-332-5840 or 1-877-386-7766



View Specifications Specification/Data Sheet

The Sunkist Commercial Juicer for fresh-squeezed citrus juice the consumers prefer. This machine can juice all day. Produces 10+ gallons of juice per hour. See operating instructions below.
This model (J-1) is Certfied For Commercial or Residential Use in USA or Canada.

Easy to clean
1,750 RPM
Corrosion Proof Plastic
Easy to use
Completely safe
2 Year Warranty
Comes with 3 cone sizes, (Lime, Orange, Grapefruit) instructions, and fact booklet
1/4 HP 17" h x 8" d
Shipping weight 37 lbs, carton size 10" x 10" x 23"

A commercial juicer that endures extended daily usage, and features a metal oscillating strainer for better separation of the juice from the pulp. By using pre-cut citrus, this juicer can easily extract between 10-12 gallons of juice per hour. It comes with three extracting bulbs, one each for lemon/lime, one for orange and one for grapefruit, each with metal inserts. It has a quiet, heavy-duty motor and is housed in gleaming, chrome-plated steel. Dome, spout and bowl support is made from corrosion-proof white plastic. This workhorse of a machine is built to last. All removable parts are dishwasher safe. It's extremely safe to use, and comes with a 2 year warranty. It listed by Underwriters Laboratories, NSF International, CSA International, and VDE (Germany); and is also approved for use in Europe.

Operating Instructions:

  • Only operate on the electric current indicated.
  • Make sure the strainer and extracting bulb is properly in place before switching the juicer on.
  • All citrus' need to be halved, and their stems trimmed, before they can be juiced.
  • Turn on the juicer and leave running until the juice has been extracted from all citrus halves.
  • Grasp the citrus half about 3/4 of the way down from the top of the fruit. Hold firmly on rotating extracting bulb, until all juice is extracted. Remove fruit peel and repeat.
  • Always empty strainer when it is 3/4 full or less, and clean the bowl support.

Juicer Tips:

  • It only takes a few seconds to get all the juice from the citrus half. Don't over extract or the bitter tasting albedo will be in your product.
  • Should your juicer overheat and stop operating, let it cool to room temperature and then press the reset button on the bottom of the machine.
  • To extend the life of your juicer, it is extremely important that liquid does not enter between the bowl support and the motor housing. Do not pick up the juicer by the bowl support, it can cause cracks where liquid can seep into the motor. Do not put juice in galvanized, wood, brass or bronze containers.
  • Motor never needs oiling; bearings are grease sealed.

Cleaning the Juicer:

  • To remove the strainer, slide strainer puller completely under edge of square strainer hub. Turn knob on top of strainer puller clockwise until strainer loosens. Remove strainer puller; lift off strainer and empty contents.
  • NOTE: Failure to comply with any of the preceding instructions may result in cancellation of the warranty.
  • Power cord or motor should not come in direct contact with water.
  • After each use, unplug the juicer, remove and thoroughly wash and dry the spout, dome, strainer and extracting bulb. Wipe away any juice that may have accumulated in the bowl support with a damp sponge.

Specifications:

  • 2 Year Warranty
  • Comes with 3 cone sizes, (Lime, Orange, Grapefruit)
  • Includes instructions and fact booklet
  • Unit Weight: 31 Lbs.
  • Motor: 1750 RPM, 1/4 HP
  • Easy to clean
  • Corrosion Proof Plastic
  • Easy to use
  • Completely safe
  • Dimensions: 17" h x 8" d
Reviews

Customers who bought this product also purchased
Sunkist Juicer Orange Extracting Bulb (w/metal insert)
Sunkist Juicer Orange Extracting Bulb (w/metal insert)
Search
 
Manufacturers
1 x Gas Pressure Regulator for all 48 inch NXR Ranges
1 x Backriser, PRO series 36 inch backsplash
1 x Burner for Oven, fits NRG series by NXR: DISCONTINUED
1 x Control panel for DRGB4801
1 x Control panel for DRGB3001: DISCONTINUED
1 x Flex Tubing, 12 inch segment, gas tube
1 x Door Hinges Pair, for 36 inch NK, LS, SC, MM, MB Series Ovens
1 x Controller, Temperature-solid state
1 x Electrode Igniter for Top Burner on NXR Ranges: DISCONTINUED*
1 x Caster Sets, large stem, set of four (Wolf pre 1992)
1 x Bake Igniter for Oven Burner, DRGB and NRG series ranges by NXR
1 x Dial for Thermostat on Ovens, Red (Wolf, Vulcan)
1 x Burner, Infrared Broiler Burner for DRGB series by NXR
1 x Open Top Pilot Assembly*: 4 burner (Commander, etc.)
1 x Dial, Thermostat (KX)
1 x Ignition Spark Module for 36 inch and 48 inch DRGB: BACKORDERED
1 x Grate, Top, Cast Iron, for 600 series, standard spacing
1 x Leg Assembly with Casters, Set of 4 for MagiCater Grills
1 x Knob (M), for Wolf Challenger Ranges, Broilers, etc.
1 x Burner component: Cap, center, for 15K burner: BACKORDERED
1 x Teaspoons, Regency flatware (1 Dozen)
1 x Early Series Burner, Tubular, Early LPG, LPAGA Grills before '96
1 x Door Hinges Pair, for 30 inch NK, LS, SC, MM, MB Series Ovens
1 x Bake Igniter for Oven Burner, DRGB, PRO, AK series ranges by NXR
1 x Burner for Oven, fits DRGB, PRO, MB, LS, SC, NK, MM: BACKORDERED
1 x Burner Valve for Top Burner, for PRO and DRGB series
1 x Door Hinges Pair, for 30 inch Pro Series: BACKORDER
1 x Center Support for 60 inch MagiCater Outdoor Grills
1 x Pilot Tube 3/16 diameter, 24 inch incl. pilot head
1 x Orifice Jet, Long, for Wolf or Vulcan where applicable
1 x Leg, 6 inch leg for Wolf Range Commercial (Vulcan), Challenger X
1 x Grate for SCB, Round Rod
1 x Grate, Rear Burner
1 x Knob (dial) for Convection Ovens Timers (Wolf, Vulcan, Hobart)
1 x Pilot Assembly, Single (SCB, FCB, CCB)
1 x Pressure Regulator: LP Gas, 3/4" NPT
1 x Burner head, cast iron spoked burner
1 x MagiCater LPAGA-60S-LP Commercial Barbecue Grill
1 x Grate, Open Top
1 x Pilot asembly for WTF-42 fryer (Nat/LP)
1 x Door Hardware: Oven Door Spring for Wolf Challenger etc.
1 x Grate, Spider (OEM)
1 x Flex tube kit, 18 inch s/s, 3/16 diameter
1 x Valve, for Gas Burner (Challenger, Challenger XL)
1 x Knob (Dial) for Thermostat, Challenger series
1 x Challenger Oven Racks (CH-18, convection)
1 x Valve, water inlet valve
1 x Valve, water regulating valve
1 x Knob, Chrome, for Wolf or Vulcan Broilers, etc.
1 x Valve, for burners on Wolf Char Broilers (SCB, ACB, CH/CHR/CHSS)
1 x Knob, Flat Up on D-stem (dark red color)
1 x Valve, water inlet valve, for CM models
1 x Pilot for Wolf Challenger Range Ovens (CH/CHSS)
1 x Motor, convection blower motor for WKGD Ovens, VC ovens
1 x Grate for SCB, Cast Diamond
1 x Pilot bracket, mount
1 x Knob E for Wolf Range Cooking Equipment, Black
1 x Thermostat Dial with 5/8 inch long protrusion for Challenger CHR
1 x Grate for SCB, Cast Waffle Grate for Char Broilers
1 x Fryer Basket, Twin Size
1 x Knob, for Char Broilers, Griddles, etc.
1 x Valve, water inlet valve, for C, EH models
1 x Door Spring Hinge Assembly for Challenger XL, Left
1 x Thermostat with Dial, for CM and CME series
1 x Oven Thermostat with Broil (for Wolf Appliance Rxxxx series)
1 x Pilot Assembly, Single (CH/CHSS)
1 x Igniter with Pilot for KCH (R), KF, KFS, FK ovens
1 x Valve, water inlet valve, for DC models
1 x Door Hardware: Oven Door Spring (Pacific Series)
1 x Blower Wheel for Wolf WKGD convection ovens, VC ovens
1 x Burner, Infrared (IR), for Wolf or Vulcan CMJ
1 x Orifice for DVOR-1422 valve, for Stock Pot Ranges, Propane LP
1 x Plastic Dome for Sunkist Juicers
$23,357.99
Manufacturer Info
Sunkist
Other products