Home » Replacement Parts » Montague Range Parts » DVMG-5309

$33.20

Valve for top burners, broilers, or griddles on Montague
[DVMG-5309]

Valve for top burners, broilers, or griddles on Montague commercial range equipment (where applicable)

1/8" NPT gas
Includes Natural Gas orifice (for use below 2000 ft. elevation)

For Montague models/series: 136, V136, UF, UFS, UFSC, UFSM, 28CBSF, 2436, 2436T, 2472, 2472T, 2020S, SP2020, and more where applicable (12-5, 12-559, 12-559S, 12-5S, 12-8, 12-9E, 12-9G, 12-S, 124-5, 124-559, 124-S, 136-0E, 136-0EPL, 136-0G, 136-0GPL, 136-10E, 136-10G, 136-11, 136-11E, 136-12, 136-12E, 136-12EPL, 136-12PL, 136-13, 136-13PL, 136-14, 136-14E, 136-15, 136-16, 136-1E, 136-1G, 136-2E, 136-2G, 136-3E, 136-3G, 136-4E, 136-4G, 136-5, 136-559, 136-559S, 136-5A, 136-5S, 136-6, 136-7, 136-7PL, 136-8, 136-8PL, 136-9A, 136-9ASE, 136-9E, 136-9G, 136LB, 136LB/12LB/UFLC-48R, 136LB/24LB/UFLC-60R, 136LB/UFLC-36R, 136S, 136XLB, 136XLB/UFLC-36R, 18-5A, 18-8, 18-8PL, 18-9A, 18-9ASE, 18-S, 2/136LB/UFLC-72R, 2/C24-8, 2/C24-8T, 2/C36-8, 2/C36-8/C18-8, 2/C36-8/C24-8, 2/C36-8T, 2/C368T/C18-8T, 2/C368T/C24-8T, 2/V136/UFLC-7R, 236, 236XLB, 24-5, 24-559, 24-559S, 24-5S, 24-8, 24-8PL, 24-9E, 24-9G, 24-S, 336XLB, 36-0E, 36-0EPL, 36-0G, 36-0GPL, 36-10E, 36-10G, 36-11, 36-11E, 36-12, 36-12E, 36-12EPL, 36-12PL, 36-13, 36-13PL, 36-14, 36-14E, 36-15, 36-16, 36-1E, 36-1G, 36-2E, 36-2G, 36-3E, 36-3G, 36-4E, 36-4G, 36-5, 36-559, 36-559S, 36-5A, 36-5S, 36-6, 36-7, 36-7PL, 36-8, 36-8PL, 36-9A, 36-9ASE, 36-9E, 36-9G, 36-S, 6-S, C12-5, C12-559, C12-559S, C12-5S, C12-8, C12-8T, C12-9E, C12-9G, C12-S, C18-5A, C18-8, C18-8PL, C18-8T, C18-9A, C18-9ASE, C18-S, C24-5, C24-559, C24-559S, C24-5S, C24-8, C24-8PL, C24-8T, C24-9E, C24-9G, C24-S, C36, C36-0E, C36-0EPL, C36-0G, C36-0GPL, C36-10E, C36-10G, C36-11, C36-11E, C36-12, C36-12E, C36-12EPL, C36-12PL, C36-13, C36-13PL, C36-14, C36-14E, C36-15, C36-16, C36-1E, C36-1G, C36-2E, C36-2G, C36-3E, C36-3G, C36-4E, C36-4G, C36-5, C36-559, C36-559S, C36-5A, C36-5S, C36-6, C36-7, C36-7PL, C36-8, C36-8PL, C36-8T, C36-9A, C36-9ASE, C36-9E, C36-9G, C36-S, CRM-1, CRM-2, CRM-3, CRM-4, CRM-5, CRM-6, M12-5, M12-559, M12-559S, M12-5S, M12-8, M12-9E, M12-9G, M12-S, M18-5A, M18-8, M18-8PL, M18-9A, M18-9ASE, M18-S, M24-5, M24-559, M24-559S, M24-5S, M24-8, M24-8PL, M24-9E, M24-9G, M24-S, M36-0E, M36-0EPL, M36-0G, M36-0GPL, M36-10E, M36-10G, M36-11, M36-11E, M36-12, M36-12E, M36-12EPL, M36-12PL, M36-13, M36-13PL, M36-14, M36-14E, M36-15, M36-16, M36-1E, M36-1G, M36-2E, M36-2G, M36-3E, M36-3G, M36-4E, M36-4G, M36-5, M36-559, M36-559S, M36-5A, M36-5S, M36-6, M36-7, M36-7PL, M36-8, M36-8PL, M36-9A, M36-9ASE, M36-9E, M36-9G, V136-0E, V136-0EPL, V136-0G, V136-0GPL, V136-10E, V136-10G, V136-11, V136-11E, V136-12, V136-12E, V136-12EPL, V136-12PL, V136-13, V136-13PL, V136-14, V136-14E, V136-15, V136-16, V136-1E, V136-1G, V136-2E, V136-2G, V136-3E, V136-3G, V136-4E, V136-4G, V136-5, V136-559, V136-559S, V136-5A, V136-5S, V136-6, V136-7, V136-7PL, V136-8, V136-8PL, V136-9A, V136-9ASE, V136-9E, V136-9G, V136-LB, V136LB/12LB/UFLC-48R, V136LB/24LB/UFLC-60R, V136LB/UFLC-36R, V136S, V136W36, V236)

(Note: LP orifice is part # DVMG-LP72, please contact us for assistance 1-877-386-7766)

Reviews

Customers who bought this product also purchased

Burner / Mixer Plate (Air Shutter, 2-1/4 inch OD)

Screws for burners, 6 pack, for Grizzly, M, R, S, 136, VG

Gaskets for burners, 6 pk. (Montague Grizzly, M, R, S, 136, VG,

Categories

Bakery
Barbeque Grills ›
Blenders ›
Char Broilers ›
Crepe Makers ›
Cleaners + Paint
Coffee & Tea ›
Commercial Ranges ›
Convection Ovens ›
Cookware ›
Cutlery + Knives ›
Dishwashers
Dual Fuel Range Stoves
Equipment Stands
Faucets + Fittings
Flatware ›
Food Preparation
Food Safety
Food Warmers
Griddles ›
Hoods, Range
Ice Cream Equipment ›
Juicers and Sectioners
Kitchen Appliances
Mixers
Panini Grills ›
Pizza Ovens
Refrigeration ›
Replacement Parts ›
  Advance - Supreme Metal
  American Range Parts
  Blodgett Range Parts
  Delfield Parts
  Dynamic Mixers Parts
  Dynasty & Jade Parts
  Garland & US Range Parts
  Giles Ventless Filters & Parts
  Hatco Krampouz Parts
  Imperial Range Parts
  Kelvinator Parts
  Lang Marine Range Parts
  Magikitchn and MagiCater Parts ›
  Montague Range Parts
  Nemco Parts and Accessories
  NXR Range Parts
  Royal Range Parts
  Scotsman Ice Machine Parts
  THOR Kitchen Range Parts
  Southbend Range Parts
  Star Mfg. - Holman Parts
  Sunkist Parts
  Wells Parts and Filters
  Wolf Range Parts
Residential Ranges and Hoods ›
Seating ›
Shelving and Storage ›
Sinks and Handsinks ›
Slicers
Steamers
Teppanyaki Cooking ›
Toasters
Ventless Cooking
Waffle Makers ›
Wolf Range Stoves ›

Manufacturers

Shopping Cart

1 x	Front Venturi, Challenger, 7.5 inch length
1 x	Grate for ACB or VACB char broilers, cast iron diamond
1 x	Dicer, Dynacube DC3 (14mm, 1/2 inch)
1 x	Challenger Oven Racks 18 inch (pre 1989 models)
1 x	THOR 36 inch Professional Dual Fuel, Electric Oven (Natural Gas)
1 x	Caster Sets for Challenger XL: set of 4, Low Profile
1 x	Salad Spinner SD92SC
1 x	Grate, Burner (front or rear single burner grate for Challenger)
1 x	Dynacube Dicer Blade Set: 10 mm, 3/8 inch
1 x	Knob (Dial) for Thermostat
1 x	Challenger XL 60 inch Charbroiler, 2 Burners, Convection
2 x	Five Year Extended Warranty for NXR AK3005
1 x	NXR AK3605-LP, Propane 36 inch Gas Range, 6 Burners (LP gas)
1 x	NXR Oven Light / Convection Fan Switch, Black, for DRGB series
1 x	Challenger XL 12 inch Range, 2 Burners, Cabinet Base (LP Gas)
1 x	Grate for ACB or VACB char broilers, cast straight
1 x	Dial (knob) for Challenger XL Oven (latest models)
1 x	Knob, Griddle Knob for NXR Range NK series
1 x	Knob, Griddle Section Knob for NXR DRGB series: Not Available
1 x	French Door Wall Oven, 30 inch (LP gas)
1 x	NXR AKD3605, 36 inch Dual Fuel Range, 6 Burners (Nat. Gas)
1 x	Flame Switch for electronic ignition, Wolf Range Challenger etc.
1 x	Pusher, for Dynamic DynaCube dicer/chopper/slicer
1 x	Door Hardware: Left Rocker Arm
1 x	Door Spring Hinge Assembly for Challenger XL, Left
1 x	THOR 30 inch Professional Gas Range with 5 burners
1 x	Knob, Burner Knob for NXR Range NK series
1 x	Challenger XL 60 inch Charbroiler, 2 Burners, Convection (LP)
1 x	Front Burner Grate
1 x	Flex tube kit, 18 inch s/s, 1/4 diameter
1 x	Door Hardware: Clevis Pin
1 x	Igniter with Pilot for KCH (R), KF, KFS, FK ovens
1 x	Dial for Thermostat, for Wolf Commander series FD t-stat
1 x	Fryer Basket, Twin Size
1 x	Elbow, male elbow, 3/8 inch to 3/8
1 x	Dial, Griddle Thermostat
1 x	Cover Assembly, complete cover for SD92 or SD99
1 x	Door Handle Bracket (left)
1 x	Dynacube Dicer Blade Set: 17mm, 3/4 inch
1 x	Burner, Inner Burner Base for Wolf Gourmet A Series
1 x	Flex tube kit, 30 inch s/s, 1/4 diameter
1 x	Door Hinges Pair, for 36 inch Pro Series Ovens
1 x	Oven Lamp, DRGB, PRO, MB series
2 x	Hand held Mixer, Dynamic MiniPro MX070
1 x	NXR AKD4807, 48 inch Dual Fuel Range, 6 Burners, Griddle
1 x	NXR Island Back for 36 inch Range
1 x	NXR AKD3001, 30 inch Dual Fuel Range, 4 Burners (LP Gas)
1 x	Challenger XL 36 inch, with Convection Oven, LP gas
1 x	Dial, Thermostat
1 x	Knob (Dial) for Gas Griddle, 100-450 degrees F
1 x	Grate, Rear Burner
1 x	Dynamic Hand Held Mixer, 16 inch
1 x	Teflon Tape Roll (thread seal tape)
1 x	Double Deck Electric Convection Oven by Wolf
1 x	Oven Door Gasket Seal, for DRGB3601, DRGB3602
1 x	Dynacube Dicer Blade Set: 7mm, 1/8 inch
1 x	Dicer, Dynacube DC3 (7mm, 1/8 inch)
1 x	Caster Sets for Challenger XL: set of 6
1 x	Gas line Flex Tube for Wolf, 3/8 inch diameter, 18 inch length
1 x	Grate, Spider, Wolf Range
1 x	Griddle Stone, Dark Color (4 x 8 inches)
1 x	Door Hardware: S-Hook
1 x	Knob, Burner Knob for NXR Range LS series
1 x	Caster Sets, large stem, set of six (Wolf pre 1992)
1 x	Grate, Open Top
1 x	Challenger XL 60 inch with 10 burners (LP Gas)
1 x	Salad Spinner SD92
1 x	Knob (Dial) for Thermostat, Challenger series
1 x	Plastic Dome for Sunkist Juicers
1 x	Dial, Thermostat (KX)
1 x	Door Hardware: Eye Bolt
1 x	High Heat Graphite Grease
1 x	Grate for SCB, SS Diamond Fabricated
1 x	Knob, Griddle Knob for NXR Range AK series
1 x	Gas line Flex Tube for Wolf, 3/8 inch diameter, 36 inch length
1 x	NXR Range Hood, 30 inch wide Hood (800 cfm)
1 x	Challenger XL 36 inch with 6 top burners
1 x	NXR AK3605, 36 inch Gas Range, 6 Burners (Natural Gas)
1 x	NXR AK4807, 48 inch Gas Range, 6 Burners, Griddle
1 x	Door Handle Tube (For 18" Oven)
1 x	Front Venturi
1 x	Drip Pan
1 x	Grate for Stock Pot Ranges (WSPR, SPR, VSP)
1 x	Caster Sets: Set of 6 stem casters
1 x	Burner, Oven (Challenger CH, CHSS, KCH, KCHSS)
1 x	Dial (knob) for Challenger XL Oven, MOD Range (2011-2016 models)
1 x	NXR oven light bulb for DRGB: BACKORDERED
1 x	Dial, Red, Thermostat (KX), for Wolf Griddles, ASA or MSA
1 x	Grate for ACB, Diamond-shape Stainless Grate
1 x	Knob, Burner Knob for NXR Range AK series
1 x	Insert and Foot, metal, 1-1/4 inch connection
1 x	NXR Island Back for 48 inch Range
1 x	Dicer, Dynacube DC3 (17mm, 3/4 inch)
1 x	Door Hardware: Oven Door Spring for Wolf Challenger etc.
1 x	Gasket for thermostat flange
1 x	Igniter, Broiler Igniter (A series Wolf Gourmet)
1 x	Grate for SCB, Slanted Rib, reversible, cast iron
1 x	Handle, handle/lever for SD92 or SD99
1 x	Heat Deflector (only deflector, for SCB)
1 x	Grate for SCB, Straight oriented Diamond shaped Ribs, Stainless
1 x	Igniter Knob for igniters on Wolf Challenger XL C36SFF models
1 x	Challenger XL 36 inch, with Convection Oven
1 x	Grate for SCB, Cast Diamond
1 x	Dynacube Dicer Blade Set: 14mm, 1/2 inch
1 x	Caster Sets: Set of 4 stem casters
1 x	Door Hardware: Oven Door Spring (Pacific Series)
1 x	Indicator Light for WKGD, Red, NO IGNITION
1 x	Dicer, Dynacube DC3 (10mm, 3/8 inch)
1 x	Door Hardware: Hinge Pin
1 x	Grate, Spider Grate, Black, Matte Finish, Wolf Gourmet models
1 x	Door Seal (LH door)
1 x	Pastry Brush
1 x	Tubing, Copper Clad Steel Tubing: 1/4"
1 x	Filter: Charcoal Pre-Filter for Wells Ventless Fryers
1 x	Top Grate Section for DRGB/NRG - NOT AVAILABLE
1 x	Valve for burner, offset mount, on Stock Pot Range (SPR)
1 x	Repair Kit for Sauce Boss
1 x	Ladle, Commercial, 6 oz.
1 x	Pilot Assembly, Single (CH/CHSS)
1 x	Knob for combination pilot safety valve
1 x	Rear Burner Grate
1 x	Pilot head with nut and ferrule: for 3/16" Tubing for Wolf or Vu
1 x	Transformer, for Wolf, Vulcan Convection Ovens, Fryers
1 x	Hamilton Beach Disher, Size 6, White Color
1 x	Oven Rack, Pro 36 inch ovens
1 x	Vollrath Sauce Boss with Legs
1 x	Ignition module controller for AR, MSD
1 x	Top Burner Valve with angled inlet
1 x	Valve, Shut Off (3/8 inch NPT)
1 x	Hamilton Beach Disher, Size 10, Ivory Color
1 x	Filter (Pre-Filter) for Wells VCS 2000 series, WVU
1 x	Crepe Batter Trowel Spreader, Round Head, Stainless Steel
1 x	Stainless Steel Batter Can, 2 quart
1 x	Double French Door Wall Oven, Gas
1 x	Safety Thermostat (Hi-Limit)
1 x	Valve for burner on Stock Pot Range (for WSPR or VSP)
1 x	Knob, Flat Up on D-stem with Wolf Logo, Dark Red
2 x	Thermostat, Safety/High Limit (IFS , IR, IHR or IFP)
1 x	Flat Metal Crepe Turner 14 inch, wide blade, wood handle
1 x	4 Year Extended Warranty for THOR Kitchen 36 inch Range
1 x	Caster Kit for Imperial Range IR series 24, 30, 36, 48, 60 inch
1 x	Sneeze Guard with Screw & Clamp down base w/48" acrylic
1 x	THOR 30 inch Tilt Panel Gas Range with 4 burners (Propane)
1 x	Pilot NAT/LP, 2CH2, griddle pilot kit
1 x	Residential Knob B-O, Black
1 x	Oven Bulb (40 watt)
1 x	Rack, Oven Rack for 36 inch NXR DRGB36xx
2 x	Pilot Valve, Single straight inline brass, 1/8 x 1/4
1 x	Eurodib 15.9 inch Crepe Griddle, Electric (208V)
1 x	Krampouz CGBIP4-P Crepe Griddle, LP Single Round (Propane Gas)
1 x	Oven Rack for W or V Series (30 inch oven)
1 x	Pilot Burner, flame pattern left, natural gas, 1/4 cct
1 x	Knob, Chrome, for Wolf or Vulcan Broilers, late models
1 x	Oven Thermostat with Broil (for Wolf Appliance Rxxxx series)
1 x	Repair Kit for Batter Boss
1 x	Open Top Pilot Assembly*: 4 burner (Commander, etc.)
1 x	Eurodib 15.9 inch Crepe Griddle, Electric (120V)
1 x	Crepe Workstation for Equipex/Sodir 350FE
1 x	Crepe Griddle Cleaning Pad Holder (Includes two cleaning pads)
1 x	Oven Pilot Assembly, Natural gas or LP, 3/16 x 1/4
1 x	Safety Valve for Vulcan etc., 1/2 inch gas, 1/4 pilot
1 x	Stainless Steel Mixing Bowl, 8 quart
1 x	Pilot Burner Assembly, Propane - LP gas
1 x	Burner, Oven Bake Burner, Cuisine Series, fits ARR-636, ARR-530
1 x	Switch, rocker switch w/Amber Light, for Waffle Makers, Warmers
1 x	Rocker Fan Switch w/light
1 x	Rack, Oven Rack for Small Oven on DRGB4801
1 x	Filter, HEPA filter with integrated carbon layer, for VCS 2000
1 x	Igniter, Broiler, AROFSG models
1 x	Infrared Broiler Burner, IR burner for Performer/Cuisine series
1 x	Pilot bracket, mount
1 x	Safety Valve (Vulcan Snorkler Convection Ovens, 7/16" Tube)
1 x	VEG Gas Fryer, 35 lbs. (Nat. Gas)
1 x	Safety Valve, US Range/Garland
1 x	Kelvinator KDC27 Ice Cream Dipping Cabinet
1 x	Burner / Mixer Plate (Air Shutter, 2.5 inch OD)
1 x	Dial, Thermostat Dial for Montague Convection Ovens, 150-550 F
1 x	Air Shutter for Tubular Burner

$159,825.80

Information

Contact Us
About Us
Our Customers
Our Location
Shipping & Returns

Twitter page for Marin Restaurant Supply: Sales and Coupons

Dvorsons.com
Wolf Stoves.com
Jade Stoves.com
THOR Stove.com
NXR Stoves.com
Dynasty Stoves.com

Manufacturer Info


-	Other products

$33.20

Valve for top burners, broilers, or griddles on Montague[DVMG-5309]

Valve for top burners, broilers, or griddles on Montague
[DVMG-5309]