Thermocouple with 18 inch copper capillary, for Safety Valves, Marin Restaurant Supply - A Division of Dvorson's Food Service Equipment Inc.

Home » Replacement Parts » Wolf Range Parts » DVOR-1618

Categories

Bakery
Barbeque Grills ›
Blenders ›
Char Broilers ›
Crepe Makers ›
Cleaners + Paint
Coffee & Tea ›
Commercial Ranges ›
Convection Ovens ›
Cookware ›
Cutlery + Knives ›
Dishwashers
Dual Fuel Range Stoves
Equipment Stands
Faucets + Fittings
Flatware ›
Food Preparation
Food Safety
Food Warmers
Griddles ›
Hoods, Range
Ice Cream Equipment ›
Juicers and Sectioners
Kitchen Appliances
Mixers
Panini Grills ›
Pizza Ovens
Refrigeration ›
Replacement Parts ›
  Advance - Supreme Metal
  American Range Parts
  Blodgett Range Parts
  Delfield Parts
  Dynamic Mixers Parts
  Dynasty & Jade Parts
  Garland & US Range Parts
  Giles Ventless Filters & Parts
  Hatco Krampouz Parts
  Imperial Range Parts
  Kelvinator Parts
  Lang Marine Range Parts
  Magikitchn and MagiCater Parts ›
  Montague Range Parts
  Nemco Parts and Accessories
  NXR Range Parts
  Royal Range Parts
  Scotsman Ice Machine Parts
  THOR Kitchen Range Parts
  Southbend Range Parts
  Star Mfg. - Holman Parts
  Sunkist Parts
  Wells Parts and Filters
  Wolf Range Parts
Residential Ranges and Hoods ›
Seating ›
Shelving and Storage ›
Sinks and Handsinks ›
Slicers
Steamers
Teppanyaki Cooking ›
Toasters
Ventless Cooking
Waffle Makers ›
Wolf Range Stoves ›

Manufacturers

Shopping Cart

1 x	Element, Hot Plate, Large, 480 Volt, 5000 Watts
1 x	Thermostat, Lang, 72 inch capillary
1 x	Knob, Gas Shut Off Valve
1 x	Dynacube Dicer Blade Set: 7mm, 1/8 inch
1 x	Open Top Pilot Assembly: 2 burner, RHP
1 x	Leg 6 inch height, stainless steel for countertop equipment
1 x	Cover Assembly, complete cover for SD92 or SD99
1 x	Large Gear for SD92 or SD99
1 x	Water Proof Seal for Dynamic SD92
1 x	Leg, 6 inch leg for Wolf Range Commercial (Vulcan), Challenger X
1 x	Dynacube Dicer Blade Set: 10 mm, 3/8 inch
1 x	Knob, Chrome, for Wolf or Vulcan Broilers, late models
1 x	Metal Polish: All-Purpose (Wenol)
1 x	Dynacube Dicer Blade Set: 17mm, 3/4 inch
1 x	Knob for top burners Wolf Challenger XL C36SFF models
1 x	Knob, Flat Up on D-stem with Wolf Logo, Dark Red
1 x	Pusher, for Dynamic DynaCube dicer/chopper/slicer
1 x	Open Top Pilot Assembly*: 4 burner (Commander, etc.)
1 x	Knob for top burner on Wolf Challenger XL, Endurance, G series
1 x	Motor, convection motor assembly for WKGD Ovens, VC ovens
1 x	Orifice Jet, Long, for Wolf or Vulcan where applicable
1 x	Knob, Flat Up on D-stem (black color)
1 x	Dynacube Dicer Blade Set: 14mm, 1/2 inch
1 x	Handle, handle/lever for SD92 or SD99
1 x	Orifice Propane (LP), for DVOR-1535 pilot burner
1 x	Orifice for DVOR-1422 valve, for Stock Pot Ranges, Propane LP
1 x	Leg 4 inch height, with satin nickel finish
1 x	Logo Emblem, Wolf
1 x	Open Top Pilot Assembly (2 burner, RHP/AHP series, 3/16 inch tub
1 x	Small Gear for SD92 or SD99
1 x	Leg 6 inch height, with stainless steel foot
1 x	Micro Switch for ignition on Top Burner Valve, Wolf Residential
1 x	Orifice holder elbow assembly for thermostat on griddles, ASA, M
1 x	Pilot Tubing for Wolf Range Challenger 3/16 diameter
1 x	Micro Switch for ignition on Top Burner Valve, Wolf Residential
1 x	Knob dial for Vulcan Griddles (MSA, 900 series, etc.)
1 x	Knob for WTF-42 fryer
1 x	Knob for AF series fryers
1 x	Knob, for Char Broilers, Griddles, etc.
1 x	Knob for Vulcan Cheesemelters, Oven, Salamander (certain models)
1 x	Dynacube Dicer Blade Set: 8.5 mm, 1/4 inch
1 x	Knob, Flat Up on D-stem (dark red color)
1 x	Knob, Griddle Thermostat Knob for Wolf Gourmet Residential Range
1 x	Axle Shaft for SD92 or SD99
1 x	Open Top Burner
1 x	Orifices, Jets for Griddle THERMOSTAT, natural gas, 6 pack
1 x	Knob, Chrome, for Wolf or Vulcan Broilers, etc.
1 x	Cutter Blade assembly for MX91, MF90, MFAP90, MX2000, MX2000SDC
1 x	Knob, pilot, 1-1/4" width
1 x	Orifice for DVOR-1422 valve, for Stock Pot Ranges, Nat. Gas
1 x	Open Top Pilot Assembly: 2 burner (Commander)
1 x	Orifices, Jets for Griddle valve, natural gas, 6 pack
1 x	Motor, convection blower motor for WKGD Ovens, VC ovens
1 x	Knob for WTF-35 fryer
1 x	Knob E for Wolf Range Cooking Equipment, Black
1 x	Heat Deflector Shield (for Tubular Burner)
1 x	Grate, Spider Grate, Black, Matte Finish, Wolf Gourmet models
1 x	Knob for Imperial Fryers, IF, IR, IHR series, etc.
1 x	Grate for SCB, SS Diamond Fabricated
1 x	Radiant, Cast Iron, for indoor charbroilers (22 inch)
1 x	Igniter for Oven Bake Burner, Wolf Gourmet Residential
1 x	Top Grid Grate, 600 series (648 models: single 48" grate series)
1 x	Pilot burner, MKG series griddles
1 x	Grate, Front Burner
1 x	Knob (Dial) for Thermostat, Challenger series
1 x	Burner, for RMB, RMB-APM, FM-RMB series (1-1/4 inch diameter)
1 x	Ignition wire for WK or VC ovens, 36 inch (where applicable)
1 x	Grate, Spider, Wolf Range

$12,074.01

Information

Contact Us
About Us
Our Customers
Our Location
Shipping & Returns

Twitter page for Marin Restaurant Supply: Sales and Coupons

Dvorsons.com
Wolf Stoves.com
Jade Stoves.com
THOR Stove.com
NXR Stoves.com
Dynasty Stoves.com

Manufacturer Info


-	Other products

Gas line Flex Tube for Wolf, 3/8 inch diameter, 18 inch length	Flex tube kit, 18 inch s/s, 3/16 diameter	Pilot Tubing for Wolf Range Challenger 3/16 diameter
Carbon Cure, carbon deposit remover for cookware	Safety Valve - TS11J, 1/4" NPT	Safety Valve for Wolf/Vulcan

$18.00

Thermocouple with 18 inch copper capillary, for Safety Valves
[DVOR-1618]

$18.00

Thermocouple with 18 inch copper capillary, for Safety Valves[DVOR-1618]

Thermocouple with 18 inch copper capillary, for Safety Valves
[DVOR-1618]