$1,359.00

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)
[HYEX-1.0]

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)

Free Shipping

Hyper-quiet External Blower, Low Profile Ventilator

1000 CFM
Mounts to exterior WALL or ROOF
Ultra-low ambient noise (40 db); infinitely variable motor speed control switch included
Includes external housing and blower system.
Includes all components needed for installation.
Custom finishes are also available, please contact us at 1-877-386-7766.
Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.

Features:

Quietly Beautiful

  • Hyper-quiet—70% quieter than conventional remote ventilators; 66 decibels ambient white noise (about that of a window air conditioner) maintains outdoor quiet and eliminates in-hood motor noise.
  • Low Profile—9" at the highest point, with 7" radiused profile. Restaurant ventilator power, without the industrial fan look.
  • Super Energy Efficient—high CFM output at 1/3 the power of comparable professional-level remote ventilators.
  • Infinitely Variable Motor Speed Control—solid state device gives you 100% control to dial in the exact vent power for the current cooking condition.
  • Maintenance-free—permanently lubricated sealed ball bearings require no upkeep. Thermal overload protection with auto reset, safeguards the system. External rotor construction places the motor at the center of the permanently attached fan wheel for superior cooling, assuring long-life and trouble-free performance.
  • Ultimate Serviceability—in the unlikely event that the systems fails, the Uni-Structure motor/impeller/control assembly is replaced as a unit.

Beautifully Simple

  • Removable Cover for quick access
  • Uni-Structure replaced as a unit
    should system fail
  • Terminal Block with set screws for
    easy, reliable connection
  • Spring Damper seals out cold
  • Extended Flashing for easy installation

Powerfully Quiet

  • Superior design moves air 125%
    more efficiently than other
    professional ventilators. Integral
    fan wheel/motor assembly is
    dynamically balanced on two
    planes virtually eliminating
    referred noise to the range hood.

Dimensions:


Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.
Please Note: Abbaka products may not be returned after they have been delivered.
Reviews
Search
 
Manufacturers
1 x Jade Oven Door Spring
1 x Pilot head with nut and ferrule: for 1/4" Tubing
1 x Air Shutter for 1 inch diameter charbroiler Burner
1 x Jade door handle bracket for rod
1 x Knob insert for Jade metal knobs, pack of 4
1 x Thermostat Dial, Jade (5/8 inch diameter protrusion-notch down)
1 x Burner, Jade/Dynasty Smoker Box Burner for DKC, KC series
1 x Door Hinge, complete kit for ONE HINGE
1 x Burner for Char Broilers, Grills
1 x Igniter Electrode for Top Burner on RJRD, RJRG, RJDG, RJGR
1 x Pin, Clevis for Jade
1 x Jade/Dynasty Oven Door Spring
1 x Igniter with Pilot for JSR, JSLB, JTRH
1 x Oven Igniter, Glow-Bar (Ignitor for RJRG Series)
1 x Dial, Red Dial for Thermostat (KX), for Jade griddles
1 x Regulator, Gas: Natural Gas, 3/4" NPT (Commercial)
1 x Tubing, Copper Clad Steel Tubing: 1/4"
2 x Thermostat Dial, Jade (5/8 inch diameter protrusion on back)
1 x Pilot Burner with Electrode, Thermocouple
1 x Knob, Gas Valve, Chrome with Red Center Stripe
1 x Burner for Char Broilers, Grills (with radiants)
1 x Air Shutter/Mixer Plate for Burner, for Commercial Jade JBR, JHP
1 x Jade door eye bolt
1 x Jade JSR 36 Oven Door Handle Rod
1 x Blower Wheel for Convection Oven Motor, JADE commercial JSR, JTR
1 x Regulator, Gas: LP Gas, 3/4" NPT (Commercial)
1 x Motor for Convection Oven, Jade Supreme
1 x Switch, Rocker, power switch w/red light (DGR or DGRC)
1 x Foot for Jade countertop broilers (feet), flanged, 1 inch dia.
1 x Jade Door Rocker Arm
1 x Spark Module, Single Point
1 x Motor for Convection Oven, Jade
1 x Ladle, Commercial, 6 oz.
1 x Bulb, Oven Bulb, oven lamp bulb for DGR, DGRS, DGRSC, RJGR
1 x Ignition Spark Module for 36 inch and 48 inch DRGB: BACKORDERED
1 x Hood, THOR 30 inch wide, with Ultra Quiet Motor, 16.5 inch tall
1 x Burner, Infrared Broiler Burner for DRGB series by NXR
2 x Bake Igniter for Oven Burner, DRGB and NRG series ranges by NXR
1 x Burner Valve, AK Top Burner, Assembly with microswitch
1 x Burner Top Grate, two burner section, PRO series
1 x Wolf 60 inch Teppanyaki Griddle (30K BTU, LP Gas Model)
1 x Igniter Hood (shields ignitor from excessive heat)
1 x HYEX 1.0 Professional Remote Vent Blower (1000 cfm)
1 x Caster for Dynasty DGRSC Ranges, 3" Locking Wheel Caster
1 x Control panel for DRGB4801
1 x Burner component: Burner Base for Top Burner - BACKORDERED*
1 x Gas Pressure Regulator for all 30 or 36 inch NXR Ranges
1 x Grate, PRO
1 x Teppanyaki Griddle, 48 inch, by American Range
1 x Grate foot pads for NXR range models
1 x NXR Range Hood, 30 inch wide Hood (800 cfm)
1 x Pilot assembly for Stock Pot Range, Front (WSPR, VSP, WSPR2)
1 x Burner Assembly, Top, Single, for DRGB: BACKORDERED COMPONENT*
1 x Burner component: Outer Burner Head for Top Burner 15K BTU
1 x Hood, THOR 24 inch wide, with Ultra Quiet Motor, 11 inch height
1 x Door Hinges Pair, for 36 inch NK, LS, SC, MM, MB Series Ovens
1 x Door Hinges Pair, for 30 or 48 inch DRGB and AK Series Ovens
1 x Oven Sheet Pan for NXR DRGB3001 or DRGB4801 Ranges
1 x Control panel for DRGB3001: DISCONTINUED
1 x Classic Italian Demitasse/Espresso Cup and Saucer, 3oz
1 x Bake Igniter for Oven Burner, DRGB, PRO, AK series ranges by NXR
1 x Wolf 48 inch Teppanyaki Griddle (30K BTU, LP Gas Model)
1 x Door Hinges Pair, for 30 inch NK, LS, SC, MM, MB Series Ovens
1 x Burner component: Inner Burner Base
1 x Gas flex tube for Safety Valve
1 x Backriser, PRO series 36 inch backsplash
1 x Wolf 48 inch Teppanyaki Griddle (30K BTU)
1 x Kobe Hood Brillia RAX094 Series (36 inch wide)
1 x Door Hinges Pair, for 30 inch Pro Series: BACKORDER
1 x HYEX 1.4 Professional Remote Vent Blower (1400 cfm)
1 x Convection Fan Motor assembly for NXR professional ranges
1 x Burner for Oven, fits NRG series by NXR: DISCONTINUED
1 x Door Hinges Pair, for 18 inch NK, LS, SC, MM, MB Series Ovens
1 x Burner component: Cap, center, for 15K burner: BACKORDERED
1 x Door Hinges Pair, for 36 inch DRGB and AK Series Ovens
1 x Burner Top Grate, two burner section, MM, NK, LS, SC series
1 x Electrode Igniter for Top Burner on NXR Ranges: DISCONTINUED*
1 x NXR Range Hood, 36 inch wide Hood (900 cfm)
1 x Door Hinges Pair, for 18 inch DRGB and AK Series Ovens
1 x Ignition Spark Module for 30 inch or 4 burner range: BACKORDERED
1 x Kobe Hood Brillia RAX094 Series (30 inch wide)
$39,748.01
Manufacturer Info
Abbaka
Other products