$19.50

Bunn Coffee Filters #20115 (one case)
[DVBN-20115]

Bunn Coffee Filters #20115 (one case)
Bunn Coffee Filter # 20115
1,000 filters per case

For Models: REGULAR-C, S, R, O, VLPF, VPR, VPS, VP-17
  • Special paper grade assures optimum extraction of coffee’s taste
  • Oxygen processed for best coffee flavor
  • Perfect for coffees requiring exact brewing, like decaf and flavored coffees
  • Superior stay-in-place design prevents coffee grounds overfow

Selection of coffee filters is a vital step in brewing perfect coffee - don’t settle for anything less than BUNN quality coffee filters. Using the results of years of research, BUNN manufactures the best filters from high quality, heavy weight paper, so the water flows properly through the coffee. BUNN filters are uniquely designed for strength so the sides are taller, and you don’t end up with overflow and grounds in your coffee.

All BUNN filters are made from 100% virgin pulp and approved by the Federal Food and Drug Administration (FDA). They are oxygen whitened, chlorine free and naturally biodegradable. No formaldehyde is used in the manufacturing of BUNN filters. Our supplier does not ship the paper to us until they believe it to be completely safe and well below the limit set by the Environmental Protection Agency. Bunn-O-Matic will not buy any paper stock which does not meet high standards of purity.

Reviews

Search
 
Manufacturers
1 x Electrode Igniter for Top Burner on NXR Ranges: DISCONTINUED*
1 x Burner Valve, AK Top Burner, Assembly with microswitch
1 x Control panel for DRGB3602: DISCONTINUED
1 x Burner Assembly, Top, Single, for DRGB: BACKORDERED COMPONENT*
1 x Convection Fan Motor assembly for NXR professional ranges
1 x Thermostat, Lang, 400 degrees, 24 inch capillary
1 x Door Hinges Pair, for 18 inch NK, LS, SC, MM, MB Series Ovens
1 x Door Hinges Pair, for 18 inch DRGB and AK Series Ovens
1 x Gas flex tube for Safety Valve
1 x Knob for combination pilot safety valve
1 x Ignition Spark Module for 30 inch or 4 burner range: BACKORDERED
1 x Burner component: Burner Base for Top Burner - BACKORDERED*
1 x Wire Pan Grate, Half Size, Chrome Plated
1 x Charcoal Filter for Giles OVH-10
1 x Fresh-O-Matic Steam Pans, Pack 100
1 x Light Assembly UV, Ultra Violet Light
1 x Liner, Bottom Tray Liner for Fresh O Matic Steamer
1 x Control panel for DRGB3001: DISCONTINUED
1 x Spring, Southbend door spring, 6-3/4 inches approx.
1 x Thermostat, Lang, 72 inch capillary
1 x Element, Hot Plate, Large, 480 Volt, 5000 Watts
1 x Broiler Igniter for Oven Broiler on NXR ranges
1 x Door Hinges Pair, for 36 inch Pro Series Ovens
1 x Gas Pressure Regulator for all 48 inch NXR Ranges
1 x Grate, PRO
1 x Knob for Southbend fryers, SGS, HDG, etc.
1 x Pre Filter for Giles FSH-3.5, FSH-4, FSH-5, FSH-6
1 x Igniter for KCMG-1RND, KCMG-1RCT/2RCT crepe griddles
1 x Thermocouple 18 inch long copper capillary
1 x Charcoal Filter for Giles FSH-5, FSH-6
1 x Thermostat Assembly for Southbend Ranges and Ovens with Alpha Br
1 x Door Hinges Pair, for 36 inch DRGB and AK Series Ovens
1 x Burner Top Grate, two burner section, PRO series
1 x Fresh-O-Matic Steam Pans, Pack 25
1 x Charcoal Filter for Giles FSH-2, FSH-2A-99, VH Fryers
1 x Charcoal Filter for Giles PO-VH, FSH-3.5, FSH-4, GVH
1 x Valve, Burner valve for 300 series ranges, now includes knob
1 x Bake Igniter for Oven Burner, DRGB, PRO, AK series ranges by NXR
1 x Door Hinges Pair, for 30 inch Pro Series: BACKORDER
1 x Thermocouple 18 inch copper capillary
1 x Gas flex tube for Main Gas Manifold, all models
1 x Backriser, PRO series 36 inch backsplash
1 x Knob for Burner Valves on 300 or 400 series Southbend Ranges
1 x Door Hinge Receiver for all NXR range models
1 x Grate foot pads for NXR range models
1 x Burner for Oven, fits NRG series by NXR: DISCONTINUED
1 x Burner Valve for Top Burner, for PRO and DRGB series
1 x Door Hinges Pair, for 18 inch Pro Series Ovens
1 x Gas Pressure Regulator for all 30 or 36 inch NXR Ranges
1 x Burner component: Outer Burner Head for Top Burner 15K BTU
1 x Bake Igniter for Oven Burner, DRGB and NRG series ranges by NXR
1 x Control panel for DRGB4801
1 x Thermostat, Lang, 72 inch capillary, Two Pole
1 x Door Hinges Pair, for 30 or 48 inch DRGB and AK Series Ovens
1 x Knob for Hatco-Krampouz KCMG-1RND crepe griddles
1 x Burner component: Inner Burner Base
1 x Thermostat for Griddles, 300 and 400 series
1 x Door Hinges Pair, for 36 inch NK, LS, SC, MM, MB Series Ovens
1 x Burner, Infrared Broiler Burner for DRGB series by NXR
1 x Ignition Spark Module for 36 inch and 48 inch DRGB: BACKORDERED
1 x Control Knob Dial for Krampouz gas griddles CGBIP4, CGBIP4-LP
1 x Burner component: Cap, center, for 15K burner: BACKORDERED
1 x Burner Top Grate, two burner section, MM, NK, LS, SC series
1 x Burner for Oven, fits DRGB, PRO, MB, LS, SC, NK, MM: BACKORDERED
1 x Door Hinges Pair, for 30 inch NK, LS, SC, MM, MB Series Ovens
1 x Burner, Small Oven Burner NK series Ranges by NXR
1 x Buffalo Chopper, Bowl Cutter
1 x Sunkist S104 Fruit and Vegetable Sectioner, 8 Wedge
1 x Sunkist Juicer Orange Extracting Bulb (w/metal insert)
1 x Burner Assembly, 15K BTU, Dual Ring, for HRG and HRD ranges
1 x Dial, Thermostat Dial, 1 inch protrusion on back (Montague)
1 x Burner Head with six slots, for Challenger (R Series), etc.
1 x Air Shutter/Mixer Plate for Burner, for Commercial Jade JBR, JHP
1 x Igniter for Oven Bake Burner on THOR HRG/LRG ranges
1 x Bulb, Oven Bulb, oven lamp for Montague Ovens
1 x Burner, Oven Bake Burner, Heritage Series
1 x Burner Head Gaskets for Wolf Range - Pack of 6
1 x Tortilla Maker
1 x Valve, water inlet valve
1 x Valve, water inlet valve, for C, EH models
1 x NXR Range Hood, 30 inch wide Hood (800 cfm)
1 x Burner for Montague Char Broilers C36, etc.
1 x Grate (Cooking Grid) for DBQ/DOBQ series BBQ (13 inch)
1 x Burner Head, Montague Range 136 series
1 x Plastic Bowl Support for Sunkist Juicers
1 x Dial, Thermostat Dial for Montague Convection Ovens, 150-550 F
1 x Thermostat, Safety/High Limit (IFS , IR, IHR or IFP)
1 x Greens Machine, 20 Gal., Stainless Steel Vegetable Dryer VP2-220
1 x Salad Spinner SD99
1 x Matfer Professional Mandoline 1000
1 x Griddle Stone Holder
1 x Metal Polish: All-Purpose (Wenol)
1 x Burner Head, Challenger CH/CHR/CHSS etc.
1 x Burner, Top Rear, for AR-6 etc.
1 x Filter: Charcoal Pre-Filter for Wells Ventless Fryers
1 x Burner for Char Broilers, Grills (with radiants)
1 x Burner, Top front burner, DGRS, DGRSC, RJGR, Select DCT models
1 x Kobe Hood Stainless Steel Panel, 36 inch wide
1 x Safety Valve, US Range/Garland
1 x Handle, handle/lever for SD92 or SD99
1 x NXR Range Hood, 36 inch wide Hood (900 cfm)
1 x Dynacube Dicer Blade Set: 17mm, 3/4 inch
1 x Grate, for Montague 136, M18, Top Double Grate
1 x Grate, Top, Cast Iron, 9 bar (21 inch x 5-1/8 inch x 5/8 inch)
1 x Element, exposed 500 watt element (118V)
1 x Burner Valve, HRD/HRG/HRT series, for Dual Ring Burners
1 x Igniter, Bake igniter, AROFSG models
1 x Carbon Cure, carbon deposit remover for cookware
1 x Grate, Broiler, Right (Montague)
1 x Bulb, Oven Bulb, oven lamp for Vulcan
1 x Sunkist S101 Fruit and Vegetable Sectioner, 4 Wedger
1 x Plastic Spout for Sunkist Juicers
1 x Knob (Dial) for Oven Mode Selector (Residential)
1 x Kobe Hood Brillia RAX094 Series (36 inch wide)
1 x Burner, Jade Broiler
1 x Blower Wheel (Montague)
1 x Knob (Dial) for Oven or Griddle Thermostat, LOW-500 degrees
1 x Knob for combination pilot safety valve
1 x Griddle Stone (3 x 6 inches)
1 x Burner for Char Broilers, Grills
1 x Pilot Assembly, IR series, Spark type, Natural or LP
1 x Convection Motor Installation Kit, 115V, 1/2hp, for HX and 115
1 x Exterior Cover for 30" Freestanding Grill
1 x Solenoid Gas (Imperial)
1 x Thermostat with Dial, for CM and CME series
1 x Blower Motor, Convection oven fan blower, Wolf AFS, etc.
1 x Dicer, Dynacube DC3 (10mm, 3/8 inch)
1 x High Heat Graphite Grease
1 x Burner assembly, front, for Montague V136, 136
1 x Micro Spark Switch for Ignition on American Range Residential
1 x Drip Tray for AR-6, ARHP, ARW, ARB, ARG
1 x Oven Rack, ARW6, 32-1/4 x 20-7/8, chrome plated
1 x Kobe Hood Brillia RAX094 Series (30 inch wide)
1 x Knob, Gas, Food Warmers, Advance Tabco Supreme Metal
1 x Knob for AF series fryers
1 x Valve, water inlet valve, for ND models
1 x Burner, Oven Bake Burner, AR series, Commercial
1 x Briquette Tray - Notched (cutout corner for Dynasty DBQ grills)
1 x Burner Assembly for Char Broiler Grills
1 x Bar Keepers Friend, Stainless Steel Cleaner
1 x American Range Wok Ring accessory, for all American Ranges
1 x Burner, for Broilers, charbroilers, late models
1 x Knob, for bell timer on WB-1, WB-2 (Wells and Star)
1 x Grate, Coal Grate for Char Broilers
1 x Air Shutter for Tubular Burner
1 x Blower Motor for Wolf Challenger and Commander Snorkler ovens
1 x Burner, Jade/Dynasty Smoker Box Burner for DKC, KC series
1 x Burner, Top Front (Assembly)
1 x Grate, Top, Cast Iron, 4 bar (21 inch x 3 inch x 2-1/8 inch)
1 x Burner, Infrared (IR), for Wolf or Vulcan CMJ
1 x Burner Assembly, Single, Challenger series (six slotted burner)
1 x Burner, Jade JTRH Titan Series Oven Burner
1 x Hook, S-hook
1 x Sunkist S107 Fruit and Vegetable Sectioner, Single slice (halfs)
1 x Knob, THOR knob for HRG Griddle or Small Oven with LED
1 x Convection Motor, 115/230V, 1/2HP
1 x WOLF Single Deck Electric Convection Oven
1 x Steak Knives, Wood Handle with Wide Blade (1 Dozen)
1 x Pub 1-V, Commercial Espresso Machine (Empire Red)
1 x Wolf Stainless Steel Stand for TYG48 Teppanyaki (STAND/C-TYG48)
1 x Oven/Steamer, Electric Combination
1 x Steak Knives, Wood Handle (1 Dozen)
1 x Vulcan VC4E Single Deck Electric Convection Oven (240 Volt)
1 x Steak Knives, Plastic Handle with Round Tip (1 Dozen)
1 x Bar-T, Commercial Espresso Machine
1 x WOLF Double Deck Electric Convection Oven
1 x Vulcan VC44E Double Deck Electric Convection Oven (240 Volt)
1 x Pre Rinse Unit with Faucet, wall mounted (low-lead)
$112,795.12
Manufacturer Info
Bunn
Other products