$1,588.00

HYEX 1.4 Professional Remote Vent Blower (1400 cfm)
[HYEX-1.4]

HYEX 1.4 Professional Remote Vent Blower (1400 cfm)

Now with Free Shipping.

Hyper-quiet External Blower, Low Profile Ventilator

1400 CFM
Duct Size: 10"
Mounts to exterior WALL or ROOF
Ultra-low ambient noise (40 db); infinitely variable motor speed control switch included
Includes external housing with blower system.
Includes all components needed for installation.
Custom finishes are also available.
Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.

Features:

Quietly Beautiful

  • Hyper-quiet—70% quieter than conventional remote ventilators; 66 decibels ambient white noise (about that of a window air conditioner) maintains outdoor quiet and eliminates in-hood motor noise.
  • Low Profile—9" at the highest point, with 7" radiused profile. Restaurant ventilator power, without the industrial fan look.
  • Super Energy Efficient—high CFM output at 1/3 the power of comparable professional-level remote ventilators.
  • Infinitely Variable Motor Speed Control—solid state device gives you 100% control to dial in the exact vent power for the current cooking condition.
  • Maintenance-free—permanently lubricated sealed ball bearings require no upkeep. Thermal overload protection with auto reset, safeguards the system. External rotor construction places the motor at the center of the permanently attached fan wheel for superior cooling, assuring long-life and trouble-free performance.
  • Ultimate Serviceability—in the unlikely event that the systems fails, the Uni-Structure motor/impeller/control assembly is replaced as a unit.

Beautifully Simple

  • Removable Cover for quick access
  • Uni-Structure replaced as a unit
    should system fail
  • Terminal Block with set screws for
    easy, reliable connection
  • Spring Damper seals out cold
  • Extended Flashing for easy installation

Powerfully Quiet

  • Superior design moves air 125%
    more efficiently than other
    professional ventilators. Integral
    fan wheel/motor assembly is
    dynamically balanced on two
    planes virtually eliminating
    referred noise to the range hood.

Dimensions:


Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.
Please Note: Abbaka products may not be returned after they have been delivered.
Reviews
Search
 
Manufacturers
1 x Strainer - Puller for #8 Juicer
1 x Stainless Metal Sponge Scrubber
1 x Sunkist Juicer Replacement Feet, set of 3
1 x Griddle Stone Holder
1 x MagiCater LPAGA-60S-NG Commercial Barbecue Grill
1 x Burner component: Inner Burner Base
1 x Meat Grinder, Meat Chopper, 1 HP, w/attachments
1 x Wolf Stainless Steel Stand for TYG48 Teppanyaki (STAND/C-TYG48)
1 x Countertop Warmer, Full Size
1 x Burner Top Grate, two burner section, PRO series
1 x LP tank connector for MagiCater Grills
1 x Burner Top Grate, two burner section, MM, NK, LS, SC series
1 x Sunkist S110 Fruit and Vegetable Sectioner, 10 Wedge
1 x Burner, for RMB, RMB-APM, FM-RMB series (1 inch diameter)
1 x Sunkist S106 Apple and Vegetable Sectioner, 6 Wedger-Cored
1 x Grate, Coal Grate for Char Broilers
1 x Dicer, Dynacube DC3 (17mm, 3/4 inch)
1 x Matfer Professional Mandoline 2000S
1 x Dicer, Dynacube DC3 (14mm, 1/2 inch)
1 x Safety Valve, US Range/Garland
1 x Radiant, Stainless Steel, for MagiCater LPG/LPAGA Grills
1 x Buffalo Chopper, Bowl Cutter
1 x Regulator and Hose Assembly with Connector
1 x Knob, for Pilot Valve runner tube on MagiKitchn Charbroilers
1 x EmberGlo Countertop Steamer, Push Button Control, Direct Connect
1 x Charcoal Filter for Giles PO-VH, FSH-3.5, FSH-4, GVH
1 x Hand held Mixer, Dynamic MiniPro MX070
1 x Sunkist S101 Fruit and Vegetable Sectioner, 4 Wedger
1 x Berkel X13E-PLUS Slicer, Gravity Feed
1 x Knob, for bell timer on WB-1, WB-2 (Wells and Star)
1 x Dynamic Hand Held Mixer, 7 inch
1 x Control panel for DRGB3001: DISCONTINUED
1 x Exterior Cover for 30 inch MagiCater Grills
1 x Ignition Spark Module for 30 inch or 4 burner range: BACKORDERED
1 x Ra Chand Model J500 Manual Citrus Juicer
1 x Knob for main burner valve on MagiCater Outdoor or Indoor Grills
1 x Early Series Burner, Tubular, Early LPG, LPAGA Grills before '96
1 x Gas Pressure Regulator for all 30 or 36 inch NXR Ranges
1 x Anodized Aluminum Deli Slicer with 12 inch German Steel Blade
1 x Control panel for DRGB4801
2 x Sunkist S105 Fruit and Vegetable Sectioner, 3-in-1, School model
1 x Gas flex tube for Main Gas Manifold, all models
1 x Set of 16 Stainless Steel Bolts and Nuts
1 x EmberGlo Countertop Steamer, Lever Control, Tortilla Model
1 x Salad Spinner SD92
1 x Kobe Hood Stainless Steel Panel, 30 inch wide
1 x Knob for Warming units, Ventless Systems w/drawers
1 x Convection Fan Motor assembly for NXR professional ranges
1 x Freestanding Infrared Bulb Warmer, Three Bulb
1 x Burner Assembly for Char Broiler Grills
1 x Ra Chand Model J210 Manual Citrus Juicer
1 x Burner, for RMB, RMB-APM, FM-RMB series (1-1/4 inch diameter)
1 x Pusher, for Dynamic DynaCube dicer/chopper/slicer
1 x Pilot, Runner Tube Pilot for Burners, 30 inch
1 x Air Shutter for Burner on RMB, FM-RMB series (1-1/4 inch OD)
1 x Pre Filter for Giles FSH-3.5, FSH-4, FSH-5, FSH-6
1 x Light Assembly UV, Ultra Violet Light
1 x VBP15 Institutional Series Holding Cabinet
1 x Runner Tube Valve (pilot control valve)
1 x Dynacube Dicer Blade Set: 10 mm, 3/8 inch
1 x Valve, Gas Burner
1 x Ignition Spark Module for 36 inch and 48 inch DRGB: BACKORDERED
1 x Flex Tubing, 12 inch segment, gas tube
1 x Sunkist S103 Fruit and Vegetable Sectioner, 6 Slice
1 x Large Gear for SD92 or SD99
1 x Dynamic Hand Held Mixer, 16 inch
1 x Small Gear for SD92 or SD99
1 x Pilot, RUNNER TUBE, Left, LPG/AGA
1 x Sunkist S104 Fruit and Vegetable Sectioner, 8 Wedge
1 x Burner Valve for Top Burner, for PRO and DRGB series
1 x Burner for Oven, fits DRGB, PRO, MB, LS, SC, NK, MM: BACKORDERED
1 x HYEX 1.4 Professional Remote Vent Blower (1400 cfm)
1 x Tortilla Maker
1 x MagiCater custom grid scraper for round, scround, heavy duty
1 x Matfer Professional Stainless Steel Mandoline With Pusher
1 x Bake Igniter for Oven Burner, DRGB, PRO, AK series ranges by NXR
1 x Grate, Char Broiler top grate
1 x Thermocouple 18 inch long copper capillary
1 x Orifice for Main Burner Valve, Magicater LPG/LPGA/etc. (propane)
1 x Sunkist S107 Fruit and Vegetable Sectioner, Single slice (halfs)
1 x Axle Shaft for SD92 or SD99
1 x Cutter Blade assembly for MX91, MF90, MFAP90, MX2000, MX2000SDC
$51,743.66
Manufacturer Info
Abbaka
Other products