$1,359.00

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)
[HYEX-1.0]

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)

Free Shipping

Hyper-quiet External Blower, Low Profile Ventilator

1000 CFM
Mounts to exterior WALL or ROOF
Ultra-low ambient noise (40 db); infinitely variable motor speed control switch included
Includes external housing and blower system.
Includes all components needed for installation.
Custom finishes are also available, please contact us at 1-877-386-7766.
Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.

Features:

Quietly Beautiful

  • Hyper-quiet—70% quieter than conventional remote ventilators; 66 decibels ambient white noise (about that of a window air conditioner) maintains outdoor quiet and eliminates in-hood motor noise.
  • Low Profile—9" at the highest point, with 7" radiused profile. Restaurant ventilator power, without the industrial fan look.
  • Super Energy Efficient—high CFM output at 1/3 the power of comparable professional-level remote ventilators.
  • Infinitely Variable Motor Speed Control—solid state device gives you 100% control to dial in the exact vent power for the current cooking condition.
  • Maintenance-free—permanently lubricated sealed ball bearings require no upkeep. Thermal overload protection with auto reset, safeguards the system. External rotor construction places the motor at the center of the permanently attached fan wheel for superior cooling, assuring long-life and trouble-free performance.
  • Ultimate Serviceability—in the unlikely event that the systems fails, the Uni-Structure motor/impeller/control assembly is replaced as a unit.

Beautifully Simple

  • Removable Cover for quick access
  • Uni-Structure replaced as a unit
    should system fail
  • Terminal Block with set screws for
    easy, reliable connection
  • Spring Damper seals out cold
  • Extended Flashing for easy installation

Powerfully Quiet

  • Superior design moves air 125%
    more efficiently than other
    professional ventilators. Integral
    fan wheel/motor assembly is
    dynamically balanced on two
    planes virtually eliminating
    referred noise to the range hood.

Dimensions:


Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.
Please Note: Abbaka products may not be returned after they have been delivered.
Reviews
Search
 
Manufacturers
1 x Grate, Char Broiler top grate
1 x Countertop Warmer, Full Size
1 x Thermocouple 18 inch copper capillary
1 x Freestanding Infrared Bulb Warmer, Three Bulb
1 x Electrode igniter for dual ring burner, 53 inch wire
1 x Burner assembly, rear-right-side, for Montague V136, 136, etc.
1 x KitchenAid Commercial-grade 8 Quart Mixer, NSF certified
1 x Dial for Montague Roast and Bake Ovens
1 x Hand held Mixer, Dynamic MiniPro MX070
1 x Dial, for Griddle Thermostat, Lo-150-400-Hi
1 x Igniter for Griddle Burner, for THOR Ranges
1 x Burner Assembly, Single, for Montague Broilers
1 x Electrode igniter for dual ring burner, 65 inch wire
1 x Infinite Switch, control for toasters, conveyor toasters (120V)
1 x Blower Wheel (Montague)
1 x Thermostat Assembly for Southbend Ranges and Ovens with Alpha Br
1 x Convection Motor Installation Kit, 115V, 1/2hp, for HX and 115
1 x Door Hinge Left for 30 inch wide HRG, HRD ranges
1 x Dynamic Hand Held Mixer, 16 inch
1 x Dial for Montague 115 with electronic ignition
1 x Dial, Thermostat Dial for Montague Convection Ovens, 150-550 F
1 x Element, exposed 1000 watt element (240V)
1 x VBP15 Institutional Series Holding Cabinet
1 x Liner, Bottom Tray Liner for Fresh O Matic Steamer
1 x Burner / Mixer Plate (Air Shutter, 2-1/4 inch OD)
1 x VBP7 Institutional Series Holding Cabinet
1 x Ceramic Radiant Single tile for Montague Ceramic Char Broilers
1 x Grate for Top Sections, Cast Iron, LRG3001U, Center Grate
1 x Grate, Spider Grate, for Garland Range models (M, H)
1 x Warming Drawers, Triple, Freestanding, Chip Warmers
1 x Door Hinge Left for 36 inch wide HRG, HRD series ranges
1 x Valve, Burner valve for 300 series ranges, now includes knob
1 x Burner, Tubular, for Montague Char Broilers
1 x Hamilton Beach Disher, Size 30, Black Color
1 x Grate, Broiler, Right (Montague)
1 x Electrode igniter for dual ring burner, 31 inch wire
1 x Fresh-O-Matic Steam Pans, Pack 25
1 x Knob, THOR knob for HRG Dual Ring Burner with LED
1 x Fresh-O-Matic Push Button Countertop Steamer, Tortilla Warmer
1 x Valve, Gas Burner
1 x Burner for Montague Cheesemelters MCM, 29 inch burner
1 x Burner for Oven, Bake Burner, LRG Series ranges
1 x Burner Assembly, 15K BTU, Dual Ring, for HRG and HRD ranges
1 x Safety Valve, US Range/Garland
1 x Door Hinge Right for 30” HRG, HRD series ranges and Large Oven
1 x Wire Pan Grate, Half Size, Chrome Plated
1 x Grate, for Montague 136, M18, Top Double Grate
1 x Grate, Spider grate for Montague Grizzly Ranges
1 x Vulcan VHFA18 Holding Cabinet
1 x Burner assembly, rear-left-side, for Montague V136, 136
1 x Grate, Top Section Grate, Cast Iron, TGC series
1 x Thermocouple, 36 inch, Heavy Duty
1 x Knob for combination pilot safety valve
1 x Door Spring, oven door on Garland R, S, series
1 x Igniter for HRG3080U series Broiler Burner (Tubular Broiler)
1 x Freestanding Infrared Bulb Warmer, Single Bulb
1 x Gaskets for burners, 6 pk. (Montague Grizzly, M, R, S, 136, VG,
1 x Burner for Oven, fits NRG series by NXR: DISCONTINUED
1 x Burner Top Grate, two burner section, MM, NK, LS, SC series
1 x Door Hinge Receiver for all NXR range models
1 x Thermometer, Candy or Deep Fryer thermometer
1 x Thermometer, Hanging Refrigerator/Freezer thermometer
1 x Burner component: Cap, center, for 15K burner: BACKORDERED
1 x Backriser, PRO series 36 inch backsplash
1 x Grate foot pads for NXR range models
1 x NXR Range Hood, 36 inch wide Hood (900 cfm)
1 x Burner Valve, AK Top Burner, Assembly with microswitch
1 x Burner Top Grate, two burner section, PRO series
1 x Control panel for DRGB4801
1 x Burner component: Inner Burner Base
1 x Thermometer, Pocket Test thermometer
1 x Sneeze Guard with Screw & Clamp down base w/48" acrylic
1 x Bake Igniter for Oven Burner, DRGB and NRG series ranges by NXR
1 x Convection Fan Motor assembly for NXR professional ranges
1 x Control panel for DRGB3001: DISCONTINUED
1 x Control panel for DRGB3602: DISCONTINUED
1 x Burner, Small Oven Burner NK series Ranges by NXR
1 x Door Hinges Pair, for 18 inch DRGB and AK Series Ovens
1 x Grate, PRO
1 x EM1400 Professional Remote Vent Blower (1400 cfm)
1 x Gas Pressure Regulator for all 48 inch NXR Ranges
1 x Gas Pressure Regulator for all 30 or 36 inch NXR Ranges
1 x Stainless Metal Sponge Scrubber
1 x Electrode Igniter for Top Burner on NXR Ranges: DISCONTINUED*
1 x Burner Assembly, Top, Single, for DRGB: BACKORDERED COMPONENT*
1 x Door Hinges Pair, for 18 inch NK, LS, SC, MM, MB Series Ovens
1 x Bake Igniter for Oven Burner, DRGB, PRO, AK series ranges by NXR
1 x Portable Stainless Steel Cooler with casters and under shelf
1 x Thermometer, Infrared (IR) thermometer
1 x Door Hinges Pair, for 36 inch Pro Series Ovens
1 x Gas flex tube for Main Gas Manifold, all models
1 x Outdoor Accessory: Designer 8 inch Roof Cap
1 x Gas flex tube for Safety Valve
$33,806.63
Manufacturer Info
Abbaka
Other products