$253.00

Burner Assembly, Top, Single, for DRGB: BACKORDERED COMPONENT*
[DVNX-TBBG36]

NOTE: *Burner Base component of this part is a Backordered Item. Out of stock component of this Item/Part may delay shipment on unit until stock is replenished on backordered component. Please contact us for assistance 1-877-386-7766

Top Burner Assembly for NXR Professional Range Cooktop, Single, Brass, Made in Germany.
Complete assembly for a single top burner (dual ring high-performance 15,000 BTU burner used on NXR freestanding range models DRGB3001, DRGB3602, DRGB3601, DRGB4801)

Fits only DRGB series model Ranges listed above, and made by NXR Professional Appliances

Please contact us for assistance or parts verification: 1-877-386-7766

Reviews

Customers who bought this product also purchased

Thermostat for Oven on NXR Range 30/36/48 inch Ranges	Broiler Igniter for Oven Broiler on NXR ranges	Ignition Spark Module, Single Point, for AK and PRO series
Bake Igniter for Oven Burner, DRGB, PRO, AK series ranges by NXR	Ignition Spark Module for 30 inch or 4 burner range: BACKORDERED	Bake Igniter for Oven Burner, DRGB and NRG series ranges by NXR

Categories

Bakery
Barbeque Grills ›
Blenders ›
Char Broilers ›
Crepe Makers ›
Cleaners + Paint
Coffee & Tea ›
Commercial Ranges ›
Convection Ovens ›
Cookware ›
Cutlery + Knives ›
Dishwashers
Dual Fuel Range Stoves
Equipment Stands
Faucets + Fittings
Flatware ›
Food Preparation
Food Safety
Food Warmers
Griddles ›
Hoods, Range
Ice Cream Equipment ›
Juicers and Sectioners
Kitchen Appliances
Mixers
Panini Grills ›
Pizza Ovens
Refrigeration ›
Replacement Parts ›
Residential Ranges and Hoods ›
Seating ›
Shelving and Storage ›
Sinks and Handsinks ›
Slicers
Steamers
Teppanyaki Cooking ›
Toasters
Ventless Cooking
Waffle Makers ›
Wolf Range Stoves ›

Manufacturers

Shopping Cart

1 x	THOR 36 inch Professional Gas Range with 6 burners (Natural Gas)
1 x	Knob for combination pilot safety valve
1 x	Grate, Spider Grate, for Garland Range models (M, H)
1 x	Grate, top grate for Garland GD broiler series
1 x	Salad Spinner SD99
1 x	Dynacube Dicer Blade Set: 8.5 mm, 1/4 inch
1 x	Wells Waffle Iron Dual Double Baker (208/240 Volt)
1 x	Cutter Blade assembly for MX91, MF90, MFAP90, MX2000, MX2000SDC
1 x	Hand held Mixer, Dynamic MiniPro MX070
1 x	Filter, HEPA filter with integrated carbon layer, for VCS 2000
1 x	Handle, handle/lever for SD92 or SD99
1 x	Charcoal Filter for Giles PO-VH, FSH-3.5, FSH-4, GVH
1 x	Infinite Switch, control for warmers/hot plates/etc. (120V)
1 x	Dynacube Dicer Blade Set: 17mm, 3/4 inch
1 x	Knob, for bell timer on WB-1, WB-2 (Wells and Star)
1 x	Dynacube Dicer Blade Set: 7mm, 1/8 inch
1 x	Salad Spinner, Electric Model EM98
1 x	Wells Waffle Iron, Single, WB1E-240V (208/240 Volt)
1 x	Dynamic Hand Held Mixer, 16 inch
1 x	HEPA Charcoal Filter Pack, for Wells model WVU-1, WVU-24, WVU-26
1 x	Charcoal Filter for Giles FSH-5, FSH-6
1 x	Dicer, Dynacube DC3 (10mm, 3/8 inch)
1 x	Wells Waffle Iron, Single, WB1E-120V, 120 Volt
1 x	Burner, DGRSC or DGRS Dynasty Oven
1 x	Control panel for DRGB3001: DISCONTINUED
1 x	Gas Pressure Regulator for all 48 inch NXR Ranges
1 x	HEPA Charcoal Filter Pack, for Wells models WVU-48, WVU-96
2 x	Filter, Baffle Filter for Wells VCS 2000 Ventless Systems
1 x	Dynacube Dicer Blade Set: 10 mm, 3/8 inch
1 x	Dicer, Dynacube DC3 (14mm, 1/2 inch)
1 x	Wells Belgian Waffle Baker Iron, BWB-1SE
2 x	Pusher, for Dynamic DynaCube dicer/chopper/slicer
1 x	Dynamic Hand Held Mixer, 7 inch
1 x	Berkel X13E-PLUS Slicer, Gravity Feed
1 x	HEPA Charcoal Filter Pack, for Wells models WVU-72
1 x	Bake Igniter for Oven Burner, DRGB and NRG series ranges by NXR
1 x	Infinite Switch, control for warmers/hot plates/etc. (240V)
1 x	Ignition Spark Module for 36 inch and 48 inch DRGB: BACKORDERED
2 x	Knob for Hatco-Krampouz KCMG-1RND crepe griddles
1 x	Burner Top Grate, two burner section, MM, NK, LS, SC series
1 x	Control Knob Dial for Krampouz gas griddles CGBIP4, CGBIP4-LP
1 x	Wells Waffle Iron Dual Double Baker (220-240 Volt)
1 x	Light Assembly UV, Ultra Violet Light
1 x	Dynacube Dicer Blade Set: 14mm, 1/2 inch
1 x	Salad Spinner SD92
1 x	Wells Waffle Iron Dual Double Baker (120 Volt)
1 x	Dicer, Dynacube DC3 (17mm, 3/4 inch)
1 x	Filter: HEPA, for Wells Ventless Fryers
1 x	Axle Shaft for SD92 or SD99
1 x	Cover Assembly, complete cover for SD92 or SD99
1 x	Burner, Jade/Dynasty Smoker Box Burner for DKC, KC series
1 x	Filter, HEPA filter with integrated carbon layer, for WVU-31CT
1 x	Dicer, Dynacube DC3 (8.5mm, 1/4 inch)
1 x	Switch, rocker switch w/Amber Light, for Waffle Makers, Warmers
1 x	Large Gear for SD92 or SD99
1 x	Filter (Pre-Filter) for Wells VCS 2000 series, WVU
1 x	Knob for Infinite Switch on Wells Warmers, Hot Plates, Toasters
1 x	Small Gear for SD92 or SD99
1 x	Update Airpot 2.5 Liter - Lever Top
1 x	Charcoal Filter for Giles FSH-2, FSH-2A-99, VH Fryers
1 x	Igniter for KCMG-1RND, KCMG-1RCT/2RCT crepe griddles
1 x	Sunkist Juicer Lemon/Lime Extracting Bulb (w/metal insert)
1 x	Burner, Small Oven Burner NK series Ranges by NXR
1 x	Burner component: Burner Base for Top Burner - BACKORDERED*
1 x	Backriser, PRO series 36 inch backsplash
1 x	Flat Metal Crepe Turner 14 inch, Krampouz
1 x	Chef Door Wall Oven, 30 inch, Electric
1 x	Burner, Oven Bake Burner, Performer Series, fits ARROB-430

$44,180.09

Information

Contact Us
About Us
Our Customers
Our Location
Shipping & Returns

Twitter page for Marin Restaurant Supply: Sales and Coupons

Dvorsons.com
Wolf Stoves.com
Jade Stoves.com
THOR Stove.com
NXR Stoves.com
Dynasty Stoves.com

Manufacturer Info


-	Other products

$253.00

Burner Assembly, Top, Single, for DRGB: BACKORDERED COMPONENT*[DVNX-TBBG36]

NOTE: *Burner Base component of this part is a Backordered Item. Out of stock component of this Item/Part may delay shipment on unit until stock is replenished on backordered component. Please contact us for assistance 1-877-386-7766

Burner Assembly, Top, Single, for DRGB: BACKORDERED COMPONENT*
[DVNX-TBBG36]