$218.50

Hood Burner Orifice Kit
[DVOR-1599]

Hood Burner Orifice Kit
• Contains the following items: • (4) #56 orifice (DVOR158-1013)
• (4) #72 orifice (DVOR158-1109)
• (3) #56 orifice (DVOR158-1014, Wolf no. 19951-56)
• (3) #72 orifice (DVOR158-1110)
• (8) #55 orifice (DVOR158-1111)
• (8) #70 orifice (DVOR158-1108)
• (4) #56 orifice (DVOR158-1131)
• (4) #72 orifice (DVOR158-1130)
• (3) Pilot orifice (DVOR187-1017)
• (3) Pilot orifice (DVOR187-1018)
• (3) Pilot orifice (DVOR154-1030)
• (3) Pilot orifice (DVOR154-1029)
• (1) Pilot orifice elbow (DVOR154-1025)
• (1) Pilot orifice elbow (DVOR154-1026)
• (6) 3/16" compression nuts and ferrules
• (6) 1/4" compression nuts and ferrules
(*note: All pilot orifice's listed in kit are also available for purchase by item)
Reviews

Search
 
Manufacturers
1 x Equipex 350FE Professional Crepe Griddle, Enameled surface (120V
1 x Gas Pressure Regulator for all 30 or 36 inch NXR Ranges
1 x Dial for Montague Roast and Bake Ovens
1 x SSC-14 Stainless Steel Polish, 10 oz. spray bottle
1 x Sunkist Juicer Bulb Set (Lemon-Lime/Orange/Grapefruit) Plastic
1 x Burner Valve, AK Top Burner, Assembly with microswitch
1 x Fan blade, 5.5 inches, for evap. motor (Delfield, Continental, R
1 x Fan Motor, for evaporator on Delfield equipment (115/120 Volt)
1 x Turbo Pot Tea Kettle, Stove top musical whistling kettle (S/S)
1 x Knob, THOR knob for Dual Fuel Top Burner
1 x Dynamic Hand Held Mixer, 16 inch
1 x Dynacube Dicer Blade Set: 17mm, 3/4 inch
1 x Dicer, Dynacube DC3 (7mm, 1/8 inch)
1 x Dynacube Dicer Blade Set: 7mm, 1/8 inch
1 x Dicer, Dynacube DC3 (10mm, 3/8 inch)
1 x Dynacube Dicer Blade Set: 14mm, 1/2 inch
1 x Salad Spinner, Electric Model EM98
1 x Large Gear for SD92 or SD99
1 x Cover Assembly, complete cover for SD92 or SD99
1 x Oven/Steamer, Electric Combination
1 x Dicer, Dynacube DC3 (8.5mm, 1/4 inch)
1 x Axle Shaft for SD92 or SD99
1 x Dicer, Dynacube DC3 (14mm, 1/2 inch)
1 x Burner Head with Gasket, Montague Range Grizzly, R series
1 x Dynacube Dicer Blade Set: 10 mm, 3/8 inch
1 x Dynacube Dicer Blade Set: 8.5 mm, 1/4 inch
1 x Small Gear for SD92 or SD99
1 x Handle, handle/lever for SD92 or SD99
1 x Salad Spinner SD92SC
1 x Dicer, Dynacube DC3 (17mm, 3/4 inch)
1 x Water Proof Seal for Dynamic SD92
1 x Pusher, for Dynamic DynaCube dicer/chopper/slicer
1 x Salad Spinner SD99
1 x Salad Spinner SD92
1 x Thermostat, Safety/High Limit (IFS , IR, IHR or IFP)
1 x Dynamic Hand Held Mixer, 7 inch
1 x Knob, Burner Knob for NXR Range DRGB series: Not Available
$29,348.39
Manufacturer Info
Wolf Range
Other products