$5,008.50

High Temp. Under Counter Dishwasher: F-18DP
[F-18DP]

High Temp. Under Counter Dishwasher: F-18DP

Free Shipping to the contiguous USA & Canada!

 Specifications/Data Sheet

Performance Features

  • This Energy Star rated - energy efficient unit includes a built in drain pump (pumped drain).
  • Completely automatic wash and rinse cycles of 150F. (65C) and 185F. with individual analog temperature gauges
  • Automatic injection of rinse-additive with built-in pump
  • Built-in automatic detergent pump for consistent washing results
  • Performance and capability per hour: ~400 11" plates or up to 600 glasses (rack 5x5)
  • Rating of 24 racks per hour
  • F-18DP - provided with a factory-installed automatic drain pump for ease of installation

F-18DP High Temp Undercounter Dishwasher (Pumped Drain)


Construction Features
  • Upper removeable integrated control panel for ease of operation and technical maintenance
  • Body, external housing, wash tank, and all chassis components in brushed stainless steel AISI type 304 18/8
  • Built for free standing installation with all side and top panels of double-walled construction for low heat and noise emissions
  • Upper and lower wash and rinse jets on revolving arms constructed of fiberglass and easy to clean and remove
  • Integrated 18/8 energy-saving stainless steel booster is a standard feature
  • Entire wash tank area protected with perforated stainless steel scrap filters plus additional shield for tank element
  • Safety micro-switch stop on the door to interrupt wash pump action
  • Thermostatic control of wash and rinse temperatures
  • Automatic fill and water level regulation of tank
  • Inner wash tank provided with pump filter for protection of wash motor
  • Independently-operated heating elements alternating between booster and wash tank
  • Alternating elements reduce maximum amperage therefore reducing total energy costs
  • Energy Star Certified Model
Technical Features
  • Dish rack capacity: 19.75 in. x 19.75 in. (500 mm. x 500 mm.)
  • Complete cycle: 160 seconds (145 sec. wash & 15 sec.rinse)
  • Single-phase electrical power supply 208-220 V. 60Hz. 22 AMPS
  • Motor-pump 0.75 H.P. with thermal overload protection
  • Wash tank element: 2800 Watts
  • Booster element: 4000 Watts
  • Maximum power absorption: 4550 Watts
  • Wash tank capacity: 7.25 U.S. gallons (26 liters)
  • Booster capacity: 2.20 U.S. gallons (8 liters)
  • Water consumption per cycle: 0.78 U.S. gallons (3 liters).
  • Working pressure: 30 psi. (dynamic)
  • Water inlet connection: 3/4 in. flexible garden-hose type connection
  • Drain connection: F-18 = 1.5 in. F-18DP = 1.0 in.
  • Weight: 165 lbs. (75 kg)


Free Shipping to the contiguous USA
Reviews
Search
 
Manufacturers
2 x Repair Kit for Batter Boss
1 x Repair Kit for Sauce Boss
1 x Add on Griddle, Steel, 11 x 11 inches (RM1111)
1 x Add on Griddle, Steel, 12 x 20 inches (RM1220)
1 x Electrode igniter for single ring burner, 65 inch wire
1 x Grate, Top Section Grate, Cast Iron, TGC series
1 x Electrode igniter for dual ring burner, 31 inch wire
1 x Door Hinges Pair, for 30 or 48 inch DRGB and AK Series Ovens
1 x THOR 36 inch Tilt Panel Gas Range with 6 burners (Propane)
1 x NXR Range Hood, 48 inch wide Hood (1200 cfm)
1 x THOR 24 inch Professional Electric Range with 4 burners
1 x THOR 24 inch Professional Gas Range with 4 burners, Propane Gas
1 x Electrode igniter for dual ring burner, 65 inch wire
1 x Door Hinge Left for Small Oven (18” wide) on 48” HRG, HRD
1 x THOR 36 inch Professional Electric Range with 5 burners
1 x Electrode igniter for single ring burner, 51 inch wire
1 x Spark Module, for late HRG4808U, HRD4803U, HRG3618U
1 x Ignition Spark Module for 36 inch and 48 inch DRGB: BACKORDERED
1 x Hood, THOR 48 inch wide, with Ultra Quiet Motor, 16.5 inch tall
1 x THOR 30 inch Professional Dual Fuel, Electric Oven (LP Ready)
1 x NXR AKD3605-LP, 36 inch Dual Fuel Range, 6 Burners (LP Gas)
1 x Burner Valve for Top Burner, for PRO and DRGB series
1 x NXR AK4807, 48 inch Gas Range, 6 Burners, Griddle
1 x THOR 30 inch Professional Electric Range with 5 burners
1 x Door Hinge Right for Small Oven (18” wide) on 48” HRG, HRD
1 x Grate, Top Section Grate, Cast Iron, HRG series
1 x Door Hinge Right for 36” HRG, HRD series ranges
1 x THOR 30 inch Professional Gas Range with 5 burners
1 x NXR Island Back for 48 inch Range
1 x Safety Valve for HRG or LRG series Thor gas Ranges
1 x Burner for Oven, Bake Burner, HRG and HDM ranges by THOR
1 x Door Hinges Pair, for 30 inch NK, LS, SC, MM, MB Series Ovens
1 x Grate for Top Sections, Cast Iron, LRG3001U, Left or Right Grate
1 x Spark Module, for HRG3080U, HRG3026U, HRD3088U, HRT3003U
1 x Door Hinges Pair, for 18 inch DRGB and AK Series Ovens
1 x Door Hinges Pair, for 18 inch NK, LS, SC, MM, MB Series Ovens
1 x Knob, Burner Knob for NXR Range DRGB series: Not Available
1 x Ignition Spark Module for NK Series Ranges by NXR
1 x Gas Pressure Regulator for all 48 inch NXR Ranges
1 x Thermostat for Large Oven on HRG, LRG, HRD, HRE range
1 x Door Hinge Right for 30” HRG, HRD series ranges and Large Oven
1 x Professional 3-1/4 inch paring knife
1 x NXR AK4807-LP, 48 inch Gas Range, 6 Burners, Griddle, LP Gas
1 x Door Hinges Pair, for 36 inch Pro Series Ovens
1 x Electrode igniter for single ring burner, 31 inch wire
1 x Electrode igniter for dual ring burner, 53 inch wire
1 x THOR 30 inch Island Trim Back for HRG3080U ranges
1 x Burner for Oven, fits DRGB, PRO, MB, LS, SC, NK, MM: BACKORDERED
1 x Control panel for DRGB3001: DISCONTINUED
1 x THOR 36 inch Island Trim Back for HRG3617U ranges
1 x Grate for Top Sections, Cast Iron, LRG3001U, Center Grate
1 x Burner component: Inner Burner Base
1 x THOR 30 inch Professional Electric Wall Oven
1 x Igniter for Oven Bake Burner on THOR HRG/LRG ranges
1 x Ignition Spark Module for 30 inch or 4 burner range: BACKORDERED
1 x Broiler Igniter for Oven Broiler on NXR ranges
1 x Burner Top Grate, two burner section, MM, NK, LS, SC series
1 x Bake Igniter for Oven Burner, DRGB, PRO, AK series ranges by NXR
1 x THOR 30 inch Tilt Panel Gas Range with 4 burners
1 x THOR 30 inch Professional Gas Range with 4 burners (LP Ready)
1 x Convection Fan Motor assembly for NXR professional ranges
1 x THOR 36 inch Professional Gas Range with 6 burners (Natural Gas)
1 x Knob, Griddle Section Knob for NXR DRGB series: Not Available
1 x THOR 36 inch Island Trim Back for HRG3618U ranges
1 x Electrode igniter for dual ring burner, Old Style, 51 inch wire
1 x THOR 36 inch Professional Dual Fuel, Electric Oven (Natural Gas)
1 x Element, bake heating element for HRD 18 oven (Non-Returnable)
1 x Backriser, PRO series 36 inch backsplash
1 x NXR AKD4807, 48 inch Dual Fuel Range, 6 Burners, Griddle
1 x NXR Range Hood, 36 inch wide Hood (900 cfm)
1 x Knob, Griddle Knob for NXR Range NK series
1 x Safety Valve, Dual Safety for HRG and LRG with dual safety valve
1 x THOR 36 inch Professional Gas Range with 6 burners (LP Ready)
1 x Knob, Oven Knob for NXR Range NRG or BX series
1 x Burner for Oven, fits NRG series by NXR: DISCONTINUED
1 x THOR 30 inch Island Trim Back for HRD3088U ranges
1 x Handle for Oven Door on LRG3001U
1 x Oven Door Gasket Seal, for DRGB3601, DRGB3602
1 x Burner Valve, HRD/HRG/HRT series, for Single Ring Burners
1 x Grate, PRO
1 x Knob, Oven Knob for NXR Range NK series
1 x Logo Badge, Black and SS color
1 x Burner Assembly, 12K BTU, Sealed Burner
1 x Knob, Oven Knob for NXR Range DRGB series: Not Available
1 x Oven Lamp, DRGB, PRO, MB series
1 x Switch, Black Rocker Light Switch/Fan Switch
1 x Leg for NXR Ranges, with adjustable height, for DRGB ranges
1 x THOR 30 inch Island Trim Back for HRG3080-BS ranges
1 x NXR AKD3605, 36 inch Dual Fuel Range, 6 Burners (Nat. Gas)
1 x Door Hinges Pair, for 30 inch Pro Series: BACKORDER
1 x Control panel for DRGB3602: DISCONTINUED
1 x THOR 36 inch Professional Dual Fuel, Electric Oven (LP Ready)
1 x Grate foot pads for NXR range models
1 x Burner, Small Oven Burner NK series Ranges by NXR
1 x THOR 24 inch Professional Gas Range with 4 burners
1 x LP Conversion Kit from NG to LP for LRG4807U
1 x Knob, THOR knob for HRG Griddle or Small Oven with LED
1 x LP Conversion Kit from NG to LP for HRD4803U
1 x LP Conversion Kit from NG to LP for HRG4804U
1 x Oven Rack for 30 inch Oven, HRG/HRD series
1 x Knob, THOR knob for Dual Fuel Oven
1 x Regulator, Gas Regulator for HRG/LRG/HRD/HRT models except HRG48
1 x LP Conversion Kit from NG to LP for LRG3601U
1 x Knob, THOR knob for HRG Dual Ring Burner with LED
1 x Knob, THOR knob for Dual Fuel Top Burner
1 x LP Conversion Kit from NG to LP for HRD3606U
1 x LP Conversion Kit from NG to LP for HRG3618U
1 x Knob, THOR knob for Top Burner, Black, LRG models
1 x LP Conversion Kit from NG to LP for HRG3617U
1 x Oven Glide Rack for 36 inch Oven, HRG/HRD series
1 x Logo Emblem Badge, Large Size
1 x LP Conversion Kit from NG to LP for HRT3003U
1 x LP Conversion Kit from NG to LP for LRG4801U
1 x Oven Rack for 18 inch Oven, HRG/HRD series, Double oven models
1 x LP Conversion Kit from NG to LP for HRG3026U
1 x Knob, THOR knob for Oven or Griddle on HRG series non-led models
1 x Oven Rack for 36 inch Oven, HRG/HRD series
1 x Knob, THOR knob for HRG Single Ring Burner with LED indicator
1 x LP Conversion Kit from NG to LP for HRT4806U
1 x Microwave Oven, Over The Range, 1000 watt (Discontinued Model)
1 x LP Conversion Kit from NG to LP for HRD3088U
1 x Mighty Green Food Processor - Stainless Steel Bowl
1 x LP Conversion Kit from NG to LP for HRG3080U
1 x NXR AKD4807, 48 inch Dual Fuel Range, 6 Burners, Griddle (LP)
1 x Dicer, Dynacube DC3 (14mm, 1/2 inch)
1 x Large Gear for SD92 or SD99
1 x Salad Spinner, Electric Model EM98
1 x Dynacube Dicer Blade Set: 17mm, 3/4 inch
1 x Dicer, Dynacube DC3 (7mm, 1/8 inch)
1 x Small Gear for SD92 or SD99
1 x Pusher, for Dynamic DynaCube dicer/chopper/slicer
1 x Dynamic Hand Held Mixer, 16 inch
1 x Handle, handle/lever for SD92 or SD99
1 x Stainless Steel Mixing Bowl, 16 quart
1 x Dicer, Dynacube DC3 (17mm, 3/4 inch)
1 x Dynacube Dicer Blade Set: 8.5 mm, 1/4 inch
1 x Hand held Mixer, Dynamic MiniPro MX070
1 x Dynamic Hand Held Mixer, 7 inch
1 x Salad Spinner SD99
1 x Dynacube Dicer Blade Set: 7mm, 1/8 inch
1 x Water Proof Seal for Dynamic SD92
1 x Salad Spinner SD92SC
1 x Dynacube Dicer Blade Set: 14mm, 1/2 inch
1 x Dicer, Dynacube DC3 (8.5mm, 1/4 inch)
1 x Dicer, Dynacube DC3 (10mm, 3/8 inch)
1 x Cover Assembly, complete cover for SD92 or SD99
1 x Axle Shaft for SD92 or SD99
1 x Dynacube Dicer Blade Set: 10 mm, 3/8 inch
1 x Cutter Blade assembly for MX91, MF90, MFAP90, MX2000, MX2000SDC
1 x Salad Spinner SD92
$87,430.56
Manufacturer Info
Jet-Tech
Other products