$1,359.00

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)
[HYEX-1.0]

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)

Free Shipping

Hyper-quiet External Blower, Low Profile Ventilator

1000 CFM
Mounts to exterior WALL or ROOF
Ultra-low ambient noise (40 db); infinitely variable motor speed control switch included
Includes external housing and blower system.
Includes all components needed for installation.
Custom finishes are also available, please contact us at 1-877-386-7766.
Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.

Features:

Quietly Beautiful

  • Hyper-quiet—70% quieter than conventional remote ventilators; 66 decibels ambient white noise (about that of a window air conditioner) maintains outdoor quiet and eliminates in-hood motor noise.
  • Low Profile—9" at the highest point, with 7" radiused profile. Restaurant ventilator power, without the industrial fan look.
  • Super Energy Efficient—high CFM output at 1/3 the power of comparable professional-level remote ventilators.
  • Infinitely Variable Motor Speed Control—solid state device gives you 100% control to dial in the exact vent power for the current cooking condition.
  • Maintenance-free—permanently lubricated sealed ball bearings require no upkeep. Thermal overload protection with auto reset, safeguards the system. External rotor construction places the motor at the center of the permanently attached fan wheel for superior cooling, assuring long-life and trouble-free performance.
  • Ultimate Serviceability—in the unlikely event that the systems fails, the Uni-Structure motor/impeller/control assembly is replaced as a unit.

Beautifully Simple

  • Removable Cover for quick access
  • Uni-Structure replaced as a unit
    should system fail
  • Terminal Block with set screws for
    easy, reliable connection
  • Spring Damper seals out cold
  • Extended Flashing for easy installation

Powerfully Quiet

  • Superior design moves air 125%
    more efficiently than other
    professional ventilators. Integral
    fan wheel/motor assembly is
    dynamically balanced on two
    planes virtually eliminating
    referred noise to the range hood.

Dimensions:


Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.
Please Note: Abbaka products may not be returned after they have been delivered.
Reviews
Search
 
Manufacturers
1 x Knob for Vulcan Cheesemelters, Oven, Salamander (certain models)
1 x Igniter Hood (shields ignitor from excessive heat)
1 x Pilot Burner with Electrode, Thermocouple
1 x Jade-Dynasty Logo Badge Emblem, JADE emblem
1 x Dynamic Hand Held Mixer, 16 inch
1 x Knob, for Char Broilers, Griddles, etc.
1 x Front Burner Grate
1 x Leg 4 inch height, with satin nickel finish
1 x Door Hardware: Left Rocker Arm
1 x Knob, Flat Up on D-stem with Wolf Logo, Dark Red
1 x Heat Deflector (only deflector, for wolf broiler model SCB/Chees
1 x Oven Igniter for DGRSC, RJGR, DGR, DGRC, DGRS, DCT
1 x Maple R-Board (reversible), 1.5 inch thick, 24 x 18 inch
1 x Bulb, Oven Bulb, oven lamp for Vulcan
1 x Gas line Flex Tube for Wolf, 3/8 inch diameter, 36 inch length
1 x Element for Electric griddles by Wolf, Vulcan, Hobart
1 x Burner, Inner Burner Base for Wolf Gourmet A Series
1 x Pin, Clevis for Jade
1 x Grate for SCB, Cast Diamond
1 x Jade JSR 36 Oven Door Handle Rod
1 x Regulator, Gas: LP Gas, 3/4" NPT (Commercial)
1 x Knob E for Wolf Range Cooking Equipment, Black
1 x Wolf Stainless Steel Stand for TYG48 Teppanyaki (STAND/C-TYG48)
1 x Indicator Light for WKGD, Red, NO IGNITION
1 x Knob insert for Jade metal knobs, pack of 4
1 x Knob, Flat Up on D-stem (dark red color)
1 x Igniter, Broiler Igniter (R series)
1 x Jade door handle bracket for rod
1 x Controller, Temperature-solid state
1 x Steak Knives, Wood Handle with Wide Blade (1 Dozen)
1 x Burner, for Broilers, charbroilers, late models
1 x Igniter Wire w/electrode for Dynasty or Jade BBQ Rotisserie
1 x Knob (dial) for Convection Ovens Timers (early series)
1 x Igniter Knob for igniters on Wolf Challenger XL C36SFF models
1 x Flame Switch for electronic ignition, Wolf Range Challenger etc.
1 x Knob D for Wolf Range Cooking Equipment, Red
1 x Bezel, Chrome with red indicator, KX type
1 x Grate, Rear Burner
1 x Fryer Basket, Twin Size
1 x Grate, Spider (OEM)
1 x NXR Range Hood, 30 inch wide Hood (800 cfm)
1 x Dual wire harness for dual VENO60I's
1 x Dial, Thermostat
1 x Burner Base Ring Outer Burner, Wolf Gourmet A Series
1 x Caster Sets for Challenger XL: set of 4, Low Profile
1 x Pilot head with nut and ferrule: for 1/4" Tubing
1 x Leg, 6 inch leg for Wolf Range Commercial (Vulcan), Challenger X
1 x Gas line Flex Tubing for Wolf, 3/8 inch size, 30 inches long
1 x Burner Assembly, Single, Challenger series (six slotted burner)
1 x Grate for SCB, Straight Ribbed, Cast Iron, reversible
1 x Dial for Thermostat, for Wolf Commander series FD t-stat
1 x Knob, pilot, 1-1/4" width
1 x Flex tube kit, 18 inch s/s, 3/16 diameter
1 x Caster Sets: Set of 6 stem casters
1 x Knob, Chrome, for Wolf or Vulcan Broilers, etc.
1 x Burner Top Ring Outer Burner, Wolf Gourmet A series (flat black
1 x Grate for SCB, Slanted Rib, reversible, cast iron
1 x Grate, Spider, Wolf Range
1 x Burner Assembly, Challenger, XL, AHP, VCRH
1 x HYEX 1.4 Professional Remote Vent Blower (1400 cfm)
1 x Dial for Thermostat on Griddles, Red
1 x Igniter (Ignitor) for Wolf or Vulcan Convection Ovens
1 x Gas Knob for Convection Ovens WKGFS
1 x Door Handle Bracket (right)
1 x Heat Deflector (only deflector, for SCB)
1 x Knob, Gas Shut Off Valve
1 x Regulator with hose, Propane, for Dynasty Grills, DBQ/DOBQ/JBQ
1 x Knob, Gas Valve for range, grills, broilers, griddles (limited s
1 x Knob, Flat Up on D-stem (black color)
1 x Blower Wheel for Wolf WKGD convection ovens, VC ovens
1 x Knob (Dial) for Thermostat, Challenger series
1 x NXR Range Hood, 48 inch wide Hood (1200 cfm)
1 x Jade Oven Door Spring
1 x Knob, Oven or Griddle thermostat dial DGRSC/RJGR, DGR/DGRC, DGRS
1 x Caster Sets for Challenger XL: set of 4
1 x Grate for ACB, Diamond-shape Stainless Grate
1 x Leg 6 inch height, with stainless steel foot
1 x Burner, for Infrared Broilers and Griddles
1 x Burner head for Wolf CH/CHSS/A/AE/AK
1 x Door Hinge Assembly Block, Challenger XL (left or right side)
1 x Burner, U-shaped Tubular Burner, Husky and Commander Series
1 x Orifice Propane (LP), for DVOR-1535 pilot burner
1 x Blower Motor for Wolf Challenger and Commander Snorkler ovens
1 x Grate for SCB, Round Rod
1 x Electrode igniter kit for top burner on Wolf Gourmet Series
1 x Open Top Pilot Assembly: 2 burner, RHP
1 x Drip Tray, Upper, for Wolf 36 inch Salamander Broiler
1 x Igniter for Dynasty-Jade 42 inch BBQ Grills (2-Spark ignitor)
1 x Guides for Oven Racks W or V Series Ranges
1 x Flex tube kit, 18 inch s/s, 1/4 diameter
1 x Grate for ACB, Griddle Plate Accessory
1 x Blower Motor, Convection oven fan blower, Wolf AFS, etc.
1 x Dial for Griddle Thermostat
1 x Burner, Oven (Challenger CH, CHSS, KCH, KCHSS)
1 x Door Catch Kit for Wolf WKGD ovens
1 x Motor for Convection Oven, Jade Supreme
1 x Leg 6 inch height, stainless steel for countertop equipment
1 x Steak Knives, Wood Handle with Round Tip (1 Dozen)
1 x Insert and Foot, metal, 1-1/4 inch connection
1 x Knob Chrome, chrome knob for Wolf Range equipment
1 x Dial, Thermostat (KX)
1 x Front Venturi, Challenger, 7.5 inch length
1 x SSC-14 Stainless Steel Polish, 10 oz. spray bottle
1 x Knob (M), for Wolf Challenger Ranges, Broilers, etc.
1 x Igniter, for Oven Bake Burner (R Series, residential)
1 x Burner, Oven
1 x Oven Test Thermometer, NSF Certified for Commercial Use
1 x Motor, convection blower motor for WKGD Ovens, VC ovens
1 x Knob (Fire Engine Red), burner knob for Wolf Range equipment
1 x Steak Knives, Wood Handle (1 Dozen)
1 x **DISCONTINUED** Booster Seat, Dual Sided, black
1 x Ignition Module for WKG and VC series
1 x Igniter for Oven Bake Burner, Wolf Gourmet Residential
1 x Grate for Stock Pot Ranges (WSPR, SPR, VSP)
1 x Igniter, Broiler Igniter (A series Wolf Gourmet)
1 x Metal Polish: All-Purpose (Wenol)
1 x Light, Indicator light for Jade Bistro Series and more
1 x Open Top Burner
1 x Oven Igniter for Dynasty-Jade (and Broiler Ignitor) with bracket
1 x Blower Wheel for Wolf Challenger Convection Ovens Snorkler
1 x Door Handle Tube (29")
1 x Door Hardware: Oven Door Spring (Pacific Series)
1 x Kobe Hood Brillia RAX094 Series (30 inch wide)
1 x Igniter Wire w/electrode for Dynasty or Jade BBQ (ignitor)
1 x Knob, Chrome, for Wolf or Vulcan Broilers, late models
1 x Infrared Burner for Rotisserie on 30 inch Grills
1 x Door Hardware: Oven Door Spring for Wolf Challenger etc.
1 x Door Hardware: S-Hook
1 x Igniter with Pilot for KCH (R), KF, KFS, FK ovens
1 x Knob for AF series fryers
1 x Burner / Mixer Plate (Air Shutter, 2-5/8 inch OD)
1 x Maple R-Board (reversible), 1.5 inch thick, 20 x 15 inch
1 x Knob for top burners Wolf Challenger XL C36SFF models
1 x Grate for SCB, Cast Waffle Grate for Char Broilers
1 x Orifices, Jets for Griddle valve, natural gas, 6 pack
1 x Burner Simmer Cap, Wolf Gourmet A series, Flat Black Matte
1 x Burner Body for Wolf Gourmet Residential Ranges
1 x Burner Assembly, for Teppanyaki Griddles by Wolf, TYG series
1 x Door Seal (LH door)
1 x HYEX 1.0 Professional Remote Vent Blower (1000 cfm)
1 x Grate for SCB, Straight oriented Diamond shaped Ribs, Stainless
1 x Wolf Stainless Steel Stand for TYG60 Teppanyaki (STAND/C-TYG60)
$29,515.05
Manufacturer Info
Abbaka
Other products