$1,359.00

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)
[HYEX-1.0]

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)

Free Shipping

Hyper-quiet External Blower, Low Profile Ventilator

1000 CFM
Mounts to exterior WALL or ROOF
Ultra-low ambient noise (40 db); infinitely variable motor speed control switch included
Includes external housing and blower system.
Includes all components needed for installation.
Custom finishes are also available, please contact us at 1-877-386-7766.
Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.

Features:

Quietly Beautiful

  • Hyper-quiet—70% quieter than conventional remote ventilators; 66 decibels ambient white noise (about that of a window air conditioner) maintains outdoor quiet and eliminates in-hood motor noise.
  • Low Profile—9" at the highest point, with 7" radiused profile. Restaurant ventilator power, without the industrial fan look.
  • Super Energy Efficient—high CFM output at 1/3 the power of comparable professional-level remote ventilators.
  • Infinitely Variable Motor Speed Control—solid state device gives you 100% control to dial in the exact vent power for the current cooking condition.
  • Maintenance-free—permanently lubricated sealed ball bearings require no upkeep. Thermal overload protection with auto reset, safeguards the system. External rotor construction places the motor at the center of the permanently attached fan wheel for superior cooling, assuring long-life and trouble-free performance.
  • Ultimate Serviceability—in the unlikely event that the systems fails, the Uni-Structure motor/impeller/control assembly is replaced as a unit.

Beautifully Simple

  • Removable Cover for quick access
  • Uni-Structure replaced as a unit
    should system fail
  • Terminal Block with set screws for
    easy, reliable connection
  • Spring Damper seals out cold
  • Extended Flashing for easy installation

Powerfully Quiet

  • Superior design moves air 125%
    more efficiently than other
    professional ventilators. Integral
    fan wheel/motor assembly is
    dynamically balanced on two
    planes virtually eliminating
    referred noise to the range hood.

Dimensions:


Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.
Please Note: Abbaka products may not be returned after they have been delivered.
Reviews
Search
 
Manufacturers
1 x LED light for Control Panel on Thor Range Stoves
1 x LP Conversion Kit from NG to LP for LRG3001U
1 x Oven Glide Rack for 30 inch Oven, HRG/HRD series
1 x Switch, Push Button Light Switch / Fan Switch
1 x Stainless Steel Batter Can, 2 quart
1 x Knob, THOR knob for Dual Fuel Top Burner
1 x Logo Emblem Badge, Large Size
1 x Oven Rack for 36 inch Oven, HRG/HRD series
1 x Spark Module, for HRG4808U, HRD4803U, HRG3618U, etc.
1 x Knob, THOR knob for Dual Fuel Oven
1 x THOR Refrigerator with 2 Drawer Freezer, French Doors
1 x LP Conversion Kit from NG to LP for LRG4801U
1 x LP Conversion Kit from NG to LP for HRT4806U
1 x LP Conversion Kit from NG to LP for HRG3031U
1 x THOR 36 inch Island Trim Back for HRD3606U ranges
1 x Thor Thermostat for Griddle, or Small Oven on 48 inch Range
1 x THOR 48 inch Professional Dual Fuel, 2 Electric Ovens (Nat. Gas)
1 x Knob, THOR knob for Oven, Black, LRG models
1 x THOR 30 inch Professional Gas Range with 5 burners (LP Ready)
1 x THOR 48 inch Island Trim Back for HRD4803U ranges
1 x THOR 48 inch Professional Gas Range with Griddle (Natural Gas)
1 x Regulator, Gas Regulator for HRG/LRG/HRD/HRT models except HRG48
1 x THOR 30 inch Island Trim Back for HRG3080-BS ranges
1 x LP Conversion Kit from NG to LP for HRG3609U
1 x Spark Module, for late HRG4808U, HRD4803U, HRG3618U
2 x THOR 36 inch Professional Gas Range with 6 burners (LP Ready)
1 x LP Conversion Kit from NG to LP for LRG3601U
1 x Logo Emblem Badge, Large Size THOR
1 x LP Conversion Kit from NG to LP for HRG3026U
1 x LP Conversion Kit from NG to LP for LRG4807U
1 x THOR 30 inch Tilt Panel Gas Range with 4 burners (Propane)
1 x THOR 36 inch Tilt Panel Gas Range with 6 burners
1 x Jade JSR 36 Oven Door Handle Rod
2 x Oven Igniter for DGRSC, RJGR, DGR, DGRC, DGRS, DCT
1 x Add on Griddle, Steel, 12 x 20 inches (RM1220)
1 x Extendible Match Holder for lighting pilot flame
1 x Radiant, Stainless Steel, for MagiCater LPG/LPAGA Grills
1 x Oven Rack for 30 inch Oven, DGRSC, RJGR series
1 x Jade door eye bolt
1 x Carbon Cure, carbon deposit remover for cookware
1 x Thermostat Dial, Jade (5/8 inch diameter protrusion-notch down)
1 x Leg Assembly with Casters, Set of 4 for MagiCater Grills
1 x Safety Valve - TS11J, 1/4" NPT
1 x Regulator on Appliance/Grill
1 x Strap for ceramic tile/briquettes (Williams Sonoma series)
1 x Rotisserie balance weight
1 x Air Shutter for 1 inch diameter charbroiler Burner
1 x Igniter, Spark for Dynasty DBQ-30 or DBQ-42 Grills, Side Burners
1 x Igniter for Dynasty-Jade 42 inch BBQ Grills (2-Spark ignitor)
1 x Spider Grate (#978)
1 x Valve, Gas valve for commercial Jade Ranges, Griddles, Broilers
1 x Burner, Tubular, for LPG, LPAGA, etc. Grills (1997 or later)
1 x Igniter with Pilot for JSR, JSLB, JTRH
1 x Conversion Kit to Natural Gas for 30 and 42 inch Grills
1 x Flex Tubing, 12 inch segment, gas tube
1 x Burner, Jade Broiler
1 x Hood, THOR 24 inch wide, with Ultra Quiet Motor, 11 inch height
1 x Jade/Dynasty Oven Door Spring
1 x Teaspoons, Regency flatware (1 Dozen)
1 x Knob for main burner valve on MagiCater Outdoor or Indoor Grills
1 x Push Button Ignition System for MagiCater 60 inch LPG/LPAGA etc.
1 x Valve, Pilot - DBL, 1/4" Tube, 1/8"
1 x Krampouz CEBIF4 Crepe Griddle, Electric Single Round (208/240V)
1 x Knob, Gas Valve for range, grills, broilers, griddles (limited s
1 x Air Shutter/Mixer Plate for Burner, for Commercial Jade JBR, JHP
1 x Warming Rack, for 42 inch Dynasty or Jade Grill
1 x Bake Igniter for Oven Burner, DRGB, PRO, AK series ranges by NXR
1 x Exterior Cover for 60 inch MagiCater Grills
1 x Pressure Regulator: Natural Gas, for NPG-30, NPG-60
1 x Smoker Drawer/Tray for DBQ/JBQ Grills
1 x NXR Range Hood, 36 inch wide Hood (900 cfm)
1 x Switch, Rocker, for fan, black (DGRSC or RJGR)
1 x MAIN BURNER VALVE (Outdoor MagiCater Grills)
1 x Regulator, Gas: LP Gas, 3/4" NPT (Commercial)
1 x Runner Tube Valve (pilot control valve)
1 x Dessert Spoons, Regency flatware (1 Dozen)
1 x Set of 16 Stainless Steel Bolts and Nuts
1 x Knob, Burner Knob for NXR Range LS series
1 x Burner, Simmer Burner, for DGRS, DGRSC, DCT Series ranges
1 x Burner, Jade/Dynasty Smoker Box Burner for DKC, KC series
1 x Regulator with hose, Propane, for Dynasty Grills, DBQ/DOBQ/JBQ
1 x Table Knives, Regency flatware, European sized (1 Dozen)
1 x Knob, Gas Valve, Chrome with Red Center Stripe
1 x Thermostat for Griddle, JGT, JSR, JTRH
1 x MagiCater custom grid scraper for round, scround, heavy duty
1 x Add On 15 inch Griddle for MagiCater Grills, 15 inch Griddle
1 x Add on Griddle, Steel, Deluxe Two Burner, 14 x 24 inches
1 x Burner, Top Front (Assembly)
1 x Burner, DGRSC or DGRS Dynasty Oven
1 x Igniter Wire w/electrode for Dynasty or Jade BBQ (ignitor)
1 x Infrared Burner for Rotisserie on 30 inch Grills
1 x Thermostat 175-500 degrees, KX (36" capillary)
1 x Burner for Char Broilers, Grills (with radiants)
1 x Center Support for 60 inch MagiCater Outdoor Grills
1 x Thermometer for MagiCater Grill, Oval (Current style)
1 x Switch, Rocker, power switch w/red light (DGR or DGRC)
1 x Screws and Nuts, Stainless Steel, for Dynasty-Jade Grills
1 x Regulator Assembly, Gas, DGRSC series, Natural gas Or Propane-LP
1 x Tubing, Copper Clad Steel Tubing: 1/4"
1 x Regulator, Gas: Natural Gas, 3/4" NPT (Commercial)
1 x Regulator, Natural Gas only, for Dynasty Grills, DBQ/DOBQ/JBQ
1 x Exterior Cover for 42" Freestanding Grill
1 x Pilot, Runner Tube Pilot for Burners, 30 inch
1 x Light, Indicator light for Jade Bistro Series and more
1 x Early Series Burner, Tubular, Early LPG, LPAGA Grills before '96
1 x Grate, Top, Cast Iron, 9 bar (21 inch x 5-1/8 inch x 5/8 inch)
1 x Salad Forks, Regency flatware (1 Dozen)
1 x Burner Radiant Only, for KC series broiler burner
1 x Thermocouple, Jade
1 x Igniter for Dynasty-Jade 30 inch BBQ Grills (4-Spark ignitor)
1 x Oyster or Cocktail Forks, Regency flatware (1 Dozen)
1 x Briquettes, Ceramic, Commercial-Grade for Grills, Char Broilers
1 x Spark Switch for: RJGR, DGR, DGRC, DGRS, DGRSC, DCT Ignition
1 x Pilot Burner with Electrode, Thermocouple
1 x Exterior Cover for 30" Freestanding Grill
1 x Jade Door Rocker Arm
1 x Euro Table Forks, Regency flatware, European sized (1 Dozen)
1 x Burner, Top front burner, DGRS, DGRSC, RJGR, Select DCT models
1 x Igniter Hood (shields ignitor from excessive heat)
1 x Kobe Hood Brillia RAX094 Series (36 inch wide)
1 x Orifice for Main Burner Valve, Magicater LPG/LPGA/etc. (propane)
1 x NXR Range Hood, 48 inch wide Hood (1200 cfm)
1 x Hood, THOR 36 inch wide, with Ultra Quiet Motor, Euro Design
1 x Flat Metal Crepe Turner 12 inch
1 x Bulb, Oven Bulb, oven lamp bulb for DGR, DGRS, DGRSC, RJGR
1 x NXR Range Hood, 30 inch wide Hood (800 cfm)
1 x Burner for Char Broilers, Grills
1 x Knob, Oven or Griddle thermostat dial DGRSC/RJGR, DGR/DGRC, DGRS
$50,731.60
Manufacturer Info
Abbaka
Other products