Home » Faucets + Fittings » DVOR-SSH36

$41.00

Residential Gas Hookup Hose, 36 inch, Stainless
[DVOR-SSH36]

Residential Gas Hookup Hose, 36 inch, Stainless
36 inch stainless steel gas hose for Residential Gas Ranges.
Natural gas or liquid propane hookup compatible.

For stationary equipment. Comes with fasteners (flare nuts and adapters).
Reviews
Search
 
Categories
Bakery
Barbeque Grills ›
Blenders ›
Char Broilers ›
Crepe Makers ›
Cleaners + Paint
Coffee & Tea ›
Commercial Ranges ›
Convection Ovens ›
Cookware ›
Cutlery + Knives ›
Dishwashers
Dual Fuel Range Stoves
Equipment Stands
Faucets + Fittings
Flatware ›
Food Preparation
Food Safety
Food Warmers
Griddles ›
Hoods, Range
Ice Cream Equipment ›
Juicers and Sectioners
Kitchen Appliances
Mixers
Panini Grills ›
Pizza Ovens
Refrigeration ›
Replacement Parts ›
Residential Ranges and Hoods ›
Seating ›
Shelving and Storage ›
Sinks and Handsinks ›
Slicers
Steamers
Teppanyaki Cooking ›
Toasters
Ventless Cooking
Waffle Makers ›
Wolf Range Stoves ›
Manufacturers
Shopping Cart
1 x Electrode igniter for single ring burner, 65 inch wire
1 x Hood, THOR 24 inch wide, with Ultra Quiet Motor, 11 inch height
1 x Handle for Oven Door on LRG3001U
1 x Door Hinge Left for Small Oven (18” wide) on 48” HRG, HRD
1 x THOR Refrigerator with 2 Drawer Freezer, French Doors
1 x Door Hinge Right for 30” HRG, HRD series ranges and Large Oven
1 x Grate, Top Section Grate, Cast Iron, TGC series
1 x Burner for Oven, Bake Burner, LRG Series ranges
1 x Grate for Top Sections, Cast Iron, LRG3601U, LRG4807U series
1 x Door Hinge Right for 36” HRG, HRD series ranges
1 x Door Hinge Left for 30 inch wide HRG, HRD ranges
1 x Burner Valve, HRD/HRG/HRT series, for Single Ring Burners
1 x Electrode igniter for single ring burner, 31 inch wire
1 x Metal Polish: All-Purpose (Wenol)
1 x Burner Assembly, 12K BTU, Sealed Burner
1 x Motor, convection motor assembly for WKGD Ovens, VC ovens
1 x Fan Switch with Toggle Motion, Commander and Challenger Series,
1 x Gas Knob for Convection Ovens WKGFS
1 x Challenger XL 12 inch Range, 2 Burners, Cabinet Base
1 x Dial for Thermostat, kit, for Wolf Commander series FD t-stat
1 x Krampouz CECIJ4 Crepe Griddle, Electric Double Square
1 x Dial, Griddle Thermostat
1 x Door Spring Hinge Assembly for Challenger XL, Right
1 x Challenger XL 36 inch with 6 top burners (LP gas)
1 x Challenger XL 12 inch Range, 2 Burners, Cabinet Base (LP Gas)
1 x Grate for ACB or VACB char broilers, cast straight
1 x Dynacube Dicer Blade Set: 17mm, 3/4 inch
1 x Krampouz CGBIP4-P Crepe Griddle, LP Single Round (Propane Gas)
1 x Dynamic Hand Held Mixer, 16 inch
1 x Burner, Oven (Challenger CH, CHSS, KCH, KCHSS)
1 x Micro Switch for ignition on Top Burner Valve, Wolf Residential
1 x Open Top Pilot Assembly: 2 burner (Commander)
1 x Drip Pan
1 x Dial, Thermostat
1 x Dial for Griddle Thermostat
1 x Flat Metal Crepe Turner 14 inch, Krampouz
1 x Burner, U-shaped Tubular Burner, Husky and Commander Series
1 x Open Top Burner
1 x Knob for top burner on Wolf Challenger XL, Endurance, G series
1 x Orifices, Jets for Griddle valve, natural gas, 6 pack
1 x Dial (knob) for Challenger XL C-series oven
1 x Dial, Red, Thermostat (KX), for Wolf Griddles, ASA or MSA
1 x Challenger XL 60 inch with 10 burners (Nat. Gas)
1 x Knob, Flat Up on D-stem (black color)
1 x Door Hardware: Hinge Pin
1 x Door Spring Hinge Assembly for Challenger XL, Left
1 x Orifice Propane (LP), for DVOR-1535 pilot burner
1 x Dicer, Dynacube DC3 (7mm, 1/8 inch)
1 x Salad Spinner SD99
1 x Salad Spinner SD92
1 x Crepe Griddle Cleaning Pad Holder (Includes two cleaning pads)
1 x Grate, Top, Cast Iron, 9 bar (21 inch x 5-1/8 inch x 5/8 inch)
1 x Caster Sets for Challenger XL: set of 4, Low Profile
1 x Open Top Pilot Assembly*: 4 burner (Commander, etc.)
1 x Grate for ACB or VACB char broilers, cast iron diamond
1 x Caster Sets for Wolf and Vulcan Fryers, LG300, LG500
1 x Orifice Jet, Long, for Wolf or Vulcan where applicable
1 x Front Burner Grate
1 x Burner, Oven
1 x Burner, Oven, Challenger XL
1 x Micro Switch for ignition on Top Burner Valve, Wolf Residential
1 x Controller, Temperature-solid state
1 x Elbow, male elbow, 3/8 inch to 3/8
1 x Front Venturi
1 x Gas line Flex Tube for Wolf, 3/8 inch diameter, 18 inch length
1 x Knob for WTF-35 fryer
1 x Leg 6 inch height, with stainless steel foot
1 x Krampouz CGCID4 Crepe Griddle, Gas Single Square
1 x Dicer, Dynacube DC3 (14mm, 1/2 inch)
1 x Door Hardware: Oven Door Spring (Pacific Series)
1 x Leg, 6 inch leg for Wolf Range Commercial (Vulcan), Challenger X
1 x Dual wire harness for dual VENO60I's
1 x Challenger XL 60 inch Charbroiler, 2 Burners, Convection
1 x Handle, handle/lever for SD92 or SD99
1 x Knob, for Char Broilers, Griddles, etc.
1 x Dial for Thermostat on Griddles, Red
1 x Ra Chand Heavy Duty Lime Press
1 x Burner, Inner Burner Base for Wolf Gourmet A Series
1 x Door Hardware: Clevis Pin
1 x Dicer, Dynacube DC3 (8.5mm, 1/4 inch)
1 x Krampouz CGBIP4 Crepe Griddle, Gas Single Round (Natural Gas)
1 x Dynacube Dicer Blade Set: 14mm, 1/2 inch
1 x Water Proof Seal for Dynamic SD92
1 x Knob for WTF-42 fryer
1 x Knob Chrome, chrome knob for Wolf Range equipment
1 x Axle Shaft for SD92 or SD99
1 x Knob E for Wolf Range Cooking Equipment, Black
1 x Crepe Griddle Cleaning Pads, pack of 15
1 x Orifice for DVOR-1422 valve, for Stock Pot Ranges, Propane LP
1 x Sneeze Guard with Screw & Clamp down base w/48" acrylic
1 x Caster Sets, large stem, set of six (Wolf pre 1992)
1 x Dynamic Hand Held Mixer, 7 inch
1 x Dial (knob) for Challenger XL Oven (latest models)
1 x Cutter Blade assembly for MX91, MF90, MFAP90, MX2000, MX2000SDC
1 x Dicer, Dynacube DC3 (10mm, 3/8 inch)
1 x Dynacube Dicer Blade Set: 10 mm, 3/8 inch
1 x Caster Sets: Set of 6 stem casters
1 x Electrode igniter kit for top burner on Wolf Gourmet Series
1 x Dial (knob) for Challenger XL Oven, MOD Range (2011-2016 models)
1 x Grate for ACB, Cast Waffle Grate for Char Broilers
1 x Orifice holder elbow assembly for thermostat on griddles, ASA, M
1 x Dicer, Dynacube DC3 (17mm, 3/4 inch)
1 x Flex tube kit, 30 inch s/s, 1/4 diameter
1 x Gas line Flex Tubing for Wolf, 3/8 inch size, 30 inches long
1 x Door Handle Bracket (right)
1 x Caster Sets: Set of 4 stem casters
1 x Caster Sets for Challenger XL: set of 6
1 x Wire Whip (Wood Handle)
1 x Dinner Forks, Dominion flatware pattern (1 Dozen)
1 x Wire Whip (Metal Handle)
1 x Demitasse Spoons, Regency flatware (1 Dozen)
1 x Parchment paper (15 inch wide parchment paper, 37 foot roll)
1 x Stainless Steel Mixing Bowl, 16 quart
1 x Soda Siphon, 1 liter, Silver
1 x Fryer Puck, Deep Fryer Cleaner
1 x Dinner Knives, Dominion flatware pattern (1 Dozen)
1 x Stainless Steel Mixing Bowl, 13 quart
1 x Table Knives, Regency flatware, European sized (1 Dozen)
1 x Carbon Cure, carbon deposit remover for cookware
1 x Salad Forks, Dominion flatware pattern (1 Dozen)
1 x Creme Brulee Torch
1 x Side Burner, Stainless Steel Double, LED lighted controls
1 x Ladle, Commercial, 6 oz.
$63,506.89
Information
Contact Us
About Us
Our Customers
Our Location
Shipping & Returns
Twitter page for Marin Restaurant Supply: Sales and Coupons
Dvorsons.com
Wolf Stoves.com
Jade Stoves.com
THOR Stove.com
NXR Stoves.com
Dynasty Stoves.com
Manufacturer Info
Dvorson's FSE
- Other products

Copyright © 2024 Marin Restaurant Supply - A Division of Dvorson's Food Service Equipment Inc.

Marin Restaurant Supply, 80 Liberty Ship Way #8, Sausalito, CA 94965
Located in the town of Sausalito in beautiful Marin County, California
Open Monday through Friday 9:00am - 5:30pm | Open to the Public

Home | Contact Us | About Us | Our Location | Dvorson's | 415-332-5840 | 1-877-386-7766

SSL EncryptionSecure Shopping
Protected by SSL Encryption		We accept Visa, MasterCard, American Express, Discover credit cards