$1,359.00

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)
[HYEX-1.0]

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)

Free Shipping

Hyper-quiet External Blower, Low Profile Ventilator

1000 CFM
Mounts to exterior WALL or ROOF
Ultra-low ambient noise (40 db); infinitely variable motor speed control switch included
Includes external housing and blower system.
Includes all components needed for installation.
Custom finishes are also available, please contact us at 1-877-386-7766.
Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.

Features:

Quietly Beautiful

  • Hyper-quiet—70% quieter than conventional remote ventilators; 66 decibels ambient white noise (about that of a window air conditioner) maintains outdoor quiet and eliminates in-hood motor noise.
  • Low Profile—9" at the highest point, with 7" radiused profile. Restaurant ventilator power, without the industrial fan look.
  • Super Energy Efficient—high CFM output at 1/3 the power of comparable professional-level remote ventilators.
  • Infinitely Variable Motor Speed Control—solid state device gives you 100% control to dial in the exact vent power for the current cooking condition.
  • Maintenance-free—permanently lubricated sealed ball bearings require no upkeep. Thermal overload protection with auto reset, safeguards the system. External rotor construction places the motor at the center of the permanently attached fan wheel for superior cooling, assuring long-life and trouble-free performance.
  • Ultimate Serviceability—in the unlikely event that the systems fails, the Uni-Structure motor/impeller/control assembly is replaced as a unit.

Beautifully Simple

  • Removable Cover for quick access
  • Uni-Structure replaced as a unit
    should system fail
  • Terminal Block with set screws for
    easy, reliable connection
  • Spring Damper seals out cold
  • Extended Flashing for easy installation

Powerfully Quiet

  • Superior design moves air 125%
    more efficiently than other
    professional ventilators. Integral
    fan wheel/motor assembly is
    dynamically balanced on two
    planes virtually eliminating
    referred noise to the range hood.

Dimensions:


Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.
Please Note: Abbaka products may not be returned after they have been delivered.
Reviews
Search
 
Manufacturers
1 x Convection Fan Motor assembly for NXR professional ranges
1 x Oven Lamp, DRGB, PRO, MB series
1 x Valve for burner on Stock Pot Range (for WSPR or VSP)
1 x Rack, Oven Rack for 30 inch NXR models
1 x Filter, HEPA filter with integrated carbon layer, for WVU-31CT
1 x Top Burner Valve with angled inlet
1 x Filter: Charcoal Pre-Filter for Wells Ventless Fryers
1 x Knob, Oven Knob for NXR Range NK series
1 x Switch relay, fits all NXR series: BACKORDERED
1 x Timer for Wolf and Vulcan convection ovens and steamers (240V)
1 x Filter, Baffle Filter for Wells VCS 2000 Ventless Systems
1 x Dynacube Dicer Blade Set: 8.5 mm, 1/4 inch
1 x Micro Switches (microswitches), Set of Four
1 x Water Proof Seal for Dynamic SD92
1 x NXR Island Back for 36 inch Range
1 x Pilot Valve - Double
1 x Fan Switch with Toggle Motion, Commander and Challenger Series,
1 x Door Seal (LH door)
1 x Knob, Flat Up on D-stem (dark red color)
1 x Flex tube kit, 18 inch s/s, 3/16 diameter
1 x Oven Thermostat, 60" capillary, Challenger XL
1 x Tape, PTFE Tape for Safety Valves etc.
1 x Knob D for Wolf Range Cooking Equipment, Red
1 x Knob, Griddle Knob for NXR Range LS series
1 x Oven Door Switch for Wolf K, KFS, KCH
1 x Pilot Burner, flame pattern left, natural gas, 1/4 cct
1 x Elbow, male elbow, 3/8 inch to 3/8
1 x Door Hardware: Oven Door Spring (Pacific Series)
1 x Door Hardware: Clevis Pin
1 x Fryer Basket, Twin Size
1 x Pilot Assembly, Single (SCB, FCB, CCB)
1 x Pilot Burner, Oven (standard pattern flame, orifice not included
1 x Pilot NAT/LP, 2CH2, griddle pilot kit
1 x Heat Deflector Shield (for Tubular Burner)
1 x Strap for ceramic tile/briquettes (Williams Sonoma series)
1 x Oven Rack, AR4, 20-7/8 x 19-7/8, chrome plated
1 x Runner Tube Valve (pilot control valve)
1 x LP tank connector for MagiCater Grills
1 x Thermocouple 48" capillary for Montague Ovens
1 x Thermostat for Griddle, JGT, JSR, JTRH
2 x Burner, for Infrared Broilers and Griddles
1 x Flex Tubing, 12 inch segment, gas tube
1 x Regulator, Nat. Gas or Propane, for Dynasty Grills, DBQ/DOBQ/JBQ
1 x Grate, Spider, Wolf Range
1 x Thermostat Dial, Jade (5/8 inch diameter protrusion on back)
1 x Valve, top burner gas, DYNASTY or JADE Residential ranges etc.
1 x Knob, Oven or Griddle thermostat dial DGRSC/RJGR, DGR/DGRC, DGRS
1 x Motor for Convection Oven, Jade Supreme
1 x Dial, Thermostat
1 x Orifices, Jets for Griddle THERMOSTAT, natural gas, 6 pack
1 x Pilot burner, Ovens, Griddles (natural gas or LP)
1 x Spring, Oven Door Spring
1 x Orifice for Main Burner Valve, Magicater LPG/LPGA/etc. (propane)
1 x Oven Door Handle, 25 inch length, steel (Montague)
1 x Thermometer, Oven Test thermometer
1 x Oven Rack, for Montague 115, HX63, R85, EK15, etc
1 x Single Pilot Assembly for ARTY Teppanyaki Series
1 x Pilot Assembly, AR series, Spark type, Natural or LP
1 x Oven Igniter for DGRSC, RJGR, DGR, DGRC, DGRS, DCT
1 x Radiant, Stainless Steel, for indoor charbroilers (22 inch)
1 x Igniter for Broiler or Griddle on Performer Series Ranges
1 x S hook, for door
1 x Pilot Valve, Single straight inline, brass, 1/8 x 3/16
1 x Blower Wheel for Wolf WKGD convection ovens, VC ovens
1 x Switch, Fan control switch for Montague Convection Ovens
1 x Safety Valve, for Montague Pizza Ovens MP
1 x Knob for Burner Valves on 300 or 400 series Southbend Ranges
1 x Gas line Flex Tube for Wolf, 3/8 inch diameter, 18 inch length
1 x Grate for SCB, Slanted Rib, reversible, cast iron
1 x Pilot Tubing for Wolf Range Challenger 3/16 diameter
1 x Air Shutter for 1 inch diameter charbroiler Burner
1 x Thermocouple 24" capillary for Montague Ovens
1 x Knob for Griddle Section on ARR series (Residential)
1 x Thermocouple with 18 inch copper capillary for American Range
1 x Add On 30 inch Griddle for MagiCater Grills, 30 inch Griddle
1 x Orifices, Jets for Hot Top valve, natural gas, 6 pack
1 x Radiant, Stainless Steel, for Montague UF charbroilers
1 x Thermocouple, Jade
1 x Safety Valve, AR Series
1 x Dial for Griddle Thermostat
1 x Igniter, Spark for Dynasty DBQ-30 or DBQ-42 Grills, Side Burners
1 x Switch, On-Off, Rocker, For Wolf or Vulcan
1 x Grate, Broiler, Right (Montague)
1 x Orifices, Jets for Griddle valve, natural gas, 6 pack
1 x Oven Door Switch, Leaf Switch
1 x Pilot Assembly for 2 Left hand Open Burners on WOLF Challenger
1 x Door Hardware: Hinge Pin
1 x Electrode igniter kit for top burner on Wolf Gourmet Series
1 x Professional 9 inch Bread Knife
1 x Spark Igniter, 2 Point/Pole
1 x Burner, Oven Bake Burner for AROSG/AROFG wall ovens
1 x Rotisserie balance weight
1 x Radiant, Char Broiler (FCB or SCB)
1 x Wire Pan Grate, Half Size, Chrome Plated
1 x Micro Switch for ignition on Top Burner Valve, Wolf Residential
1 x Rear Venturi, 17 inch, Challenger
1 x Update Swirl Insulated Server Carafe, 20 oz.
1 x Front Venturi
1 x Oven Thermostat with Broil (for Wolf Appliance Rxxxx series)
1 x Tubular Burner Steel (for SCB with Natural Gas)
2 x Tubular Burner Steel (Voyager Grills with Natural Gas)
1 x Wolf Char Broiler Model ACB25 Achiever (Natural Gas)
$19,058.47
Manufacturer Info
Abbaka
Other products