$1,359.00

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)
[HYEX-1.0]

HYEX 1.0 Professional Remote Vent Blower (1000 cfm)

Free Shipping

Hyper-quiet External Blower, Low Profile Ventilator

1000 CFM
Mounts to exterior WALL or ROOF
Ultra-low ambient noise (40 db); infinitely variable motor speed control switch included
Includes external housing and blower system.
Includes all components needed for installation.
Custom finishes are also available, please contact us at 1-877-386-7766.
Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.

Features:

Quietly Beautiful

  • Hyper-quiet—70% quieter than conventional remote ventilators; 66 decibels ambient white noise (about that of a window air conditioner) maintains outdoor quiet and eliminates in-hood motor noise.
  • Low Profile—9" at the highest point, with 7" radiused profile. Restaurant ventilator power, without the industrial fan look.
  • Super Energy Efficient—high CFM output at 1/3 the power of comparable professional-level remote ventilators.
  • Infinitely Variable Motor Speed Control—solid state device gives you 100% control to dial in the exact vent power for the current cooking condition.
  • Maintenance-free—permanently lubricated sealed ball bearings require no upkeep. Thermal overload protection with auto reset, safeguards the system. External rotor construction places the motor at the center of the permanently attached fan wheel for superior cooling, assuring long-life and trouble-free performance.
  • Ultimate Serviceability—in the unlikely event that the systems fails, the Uni-Structure motor/impeller/control assembly is replaced as a unit.

Beautifully Simple

  • Removable Cover for quick access
  • Uni-Structure replaced as a unit
    should system fail
  • Terminal Block with set screws for
    easy, reliable connection
  • Spring Damper seals out cold
  • Extended Flashing for easy installation

Powerfully Quiet

  • Superior design moves air 125%
    more efficiently than other
    professional ventilators. Integral
    fan wheel/motor assembly is
    dynamically balanced on two
    planes virtually eliminating
    referred noise to the range hood.

Dimensions:


Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.
Please Note: Abbaka products may not be returned after they have been delivered.
Reviews
Search
 
Manufacturers
1 x Radiant, Stainless Steel, for indoor charbroilers (20-5/8 inch)
1 x Thermocouple 18 inch long copper capillary
1 x Burner, Jade/Dynasty Smoker Box Burner for DKC, KC series
1 x Air Shutter for Burner on RMB, FM-RMB, CM series (1 inch OD)
1 x Burner for Char Broilers, Grills (with radiants)
1 x Wolf 48 inch Teppanyaki Griddle (30K BTU)
1 x Door Hinge, complete kit for ONE HINGE
1 x Burner, Small Oven Burner NK series Ranges by NXR
1 x Foot for Jade countertop broilers (feet), flanged, 1 inch dia.
1 x Grate, Bottom (Cast Iron, 8" x 15")
1 x Burner, Top Front (Assembly)
1 x Infinite Switch, control for toasters, conveyor toasters (120V)
1 x Grate, Top, Cast Iron, 9 bar (21 inch x 5-1/8 inch x 5/8 inch)
1 x Knob for main burner valve on MagiCater Outdoor or Indoor Grills
1 x Grate, top grate for Garland GD broiler series
1 x Air Shutter for 1 inch diameter charbroiler Burner
1 x Wolf 48 inch Teppanyaki Griddle (30K BTU, LP Gas Model)
1 x Burner, Simmer Burner, for DGRS, DGRSC, DCT Series ranges
1 x Top Grid Grate, 600 series (648 models: single 48" grate series)
1 x Gas flex tube for Safety Valve
1 x Solenoid Gas Valve
1 x Magicoal ceramic briquettes, box of 100
1 x Burner, Jade JGT replacement oven burner, Dynasty compatible
1 x Briquette Tray - Notched (cutout corner for Dynasty DBQ grills)
1 x Grate, Char Broiler top grate
1 x Burner, Infrared Broiler Burner for DRGB series by NXR
1 x Top Grid Grate, 600 series (648 and 672 left/right), standard
1 x Burner for Oven, fits DRGB, PRO, MB, LS, SC, NK, MM: BACKORDERED
1 x Pilot burner, MKG series griddles
1 x Blower Wheel for Convection Oven Motor, JADE commercial JSR, JTR
1 x Door Hinges Pair, for 18 inch Pro Series Ovens
1 x Ignition Spark Module for 36 inch and 48 inch DRGB: BACKORDERED
1 x Lodge 12 inch Logic Skillet
1 x Grate, Spider Grate, for Garland Range models (M, H)
1 x Top Grid Grate, 600 series (660 left or right grate), standard
1 x Hose and Pressure Regulator Kit for 30 and 42 inch Grills
1 x Door Spring, oven door on Garland R, S, series
1 x Burner, Top Rear Assembly
1 x Dial for Griddle Thermostat on Jade commercial ranges
1 x Burner component: Inner Burner Base
1 x Burner Radiant Only, for KC series broiler burner
1 x Burner, for RMB, RMB-APM, FM-RMB series (1-1/4 inch diameter)
1 x Wolf 60 inch Teppanyaki Griddle (30K BTU, LP Gas Model)
1 x Grate, Coal Grate for Char Broilers
1 x Grate, Top, Cast Iron, for 600 series, fish spacing
1 x Lodge 10-1/4 inch Logic Skillet
1 x Burner Valve, AK Top Burner, Assembly with microswitch
1 x Carbon Cure, carbon deposit remover for cookware
1 x Door Hinges Pair, for 18 inch NK, LS, SC, MM, MB Series Ovens
1 x Safety Valve (Star Fryers, BASO type)
1 x Caster for Dynasty DGRSC Ranges, 3" Non-Locking Wheel Caster
1 x Briquette Tray (for Dynasty - Jade Outdoor Grills)
1 x Top Grid Grate, 600 series (630 models grate), standard
1 x Door Hinges Pair, for 30 inch Pro Series: BACKORDER
1 x Electrode Igniter for Top Burner on NXR Ranges: DISCONTINUED*
1 x Burner, Top front burner, DGRS, DGRSC, RJGR, Select DCT models
1 x MagiCater custom grid scraper, SCROUND
1 x Convection Fan Motor assembly for NXR professional ranges
1 x Mobile Smart Heater, LP Gas
1 x Caster for Dynasty DGRSC Ranges, 3" Locking Wheel Caster
1 x Grate foot pads for NXR range models
1 x Control panel for DRGB3001: DISCONTINUED
1 x Top Grid Grate, 600 series (672 center grate), standard
1 x THOR 30 inch Tilt Panel Gas Range with 4 burners (Propane)
1 x Burner component: Cap, center, for 15K burner: BACKORDERED
1 x Burner, for RMB, RMB-APM, FM-RMB series (1 inch diameter)
1 x Bake Igniter for Oven Burner, DRGB and NRG series ranges by NXR
1 x Exterior Cover for 42" Freestanding Grill
1 x Valve, Gas Burner valve for MagiKitch'n Indoor Char Broilers
1 x Burner Assembly for Char Broiler Grills
1 x Burner component: Burner Base for Top Burner - BACKORDERED*
1 x Radiant, Cast Iron, for indoor charbroilers (22 inch)
1 x Knob for combination pilot safety valve
1 x Burner Assembly, Top, Single, for DRGB: BACKORDERED COMPONENT*
1 x Burner Top Grate, two burner section, PRO series
1 x Burner Top Grate, two burner section, MM, NK, LS, SC series
1 x Safety Valve, US Range/Garland
1 x Grate, PRO
1 x Burner, DGRSC or DGRS Dynasty Oven
1 x Top Grid Grate, 600 series (624 or 660-center grate), standard
1 x Door Hinges Pair, for 30 or 48 inch DRGB and AK Series Ovens
1 x Burner component: Outer Burner Head for Top Burner 15K BTU
1 x Exterior Cover for 30" Freestanding Grill
1 x Main Burner Valve for Magikitchn Indoor Charbroilers
1 x Broiler Igniter for Oven Broiler on NXR ranges
1 x Door Hinges Pair, for 36 inch Pro Series Ovens
1 x Wolf 60 inch Teppanyaki Griddle (30K BTU)
1 x Grate (Cooking Grid) for DBQ/DOBQ series BBQ (13 inch)
1 x Burner, Jade JTRH Titan Series Oven Burner
1 x Teppanyaki Griddle, 48 inch, by American Range
1 x Control panel for DRGB3602: DISCONTINUED
1 x Thermocouple, 36 inch, Heavy Duty
1 x Gas Pressure Regulator for all 30 or 36 inch NXR Ranges
1 x Dial, Red Dial for Thermostat (KX), for Jade griddles
1 x Door Hinges Pair, for 36 inch DRGB and AK Series Ovens
1 x Ignition Spark Module for 30 inch or 4 burner range: BACKORDERED
1 x Burner, Dynachrome "H-burner"
1 x Carbon-Off cleaning product
1 x Seven Qt. Dutch Oven with loop handles
1 x Burner, RJGR Jade/Dynasty Range oven, late DGRSC
1 x Backriser, PRO series 36 inch backsplash
1 x Grate, Top, Cast Iron, 4 bar (21 inch x 3 inch x 2-1/8 inch)
1 x Burner for Oven, fits NRG series by NXR: DISCONTINUED
1 x Door Hinges Pair, for 18 inch DRGB and AK Series Ovens
1 x Radiant, Stainless Steel, for indoor charbroilers (22 inch)
1 x Knob for combination pilot safety valve
1 x Safety Valve (Star Fryers, Griddles, etc. BASO type)
1 x Burner, JBR series oven burner, commercial
1 x Door Hinges Pair, for 36 inch NK, LS, SC, MM, MB Series Ovens
1 x Burner Valve for Top Burner, for PRO and DRGB series
1 x Burner, Jade Broiler
1 x THOR 48 inch Professional Dual Fuel, 2 Electric Ovens (LP Ready)
1 x Control panel for DRGB4801
1 x Lodge 8 inch Logic Skillet
1 x Hook, S-hook
1 x Heat Deflector Shield (for Tubular Burner)
1 x Knob (M), for Wolf Challenger Ranges, Broilers, etc.
$60,760.57
Manufacturer Info
Abbaka
Other products