$1,588.00

HYEX 1.4 Professional Remote Vent Blower (1400 cfm)
[HYEX-1.4]

HYEX 1.4 Professional Remote Vent Blower (1400 cfm)

Now with Free Shipping.

Hyper-quiet External Blower, Low Profile Ventilator

1400 CFM
Duct Size: 10"
Mounts to exterior WALL or ROOF
Ultra-low ambient noise (40 db); infinitely variable motor speed control switch included
Includes external housing with blower system.
Includes all components needed for installation.
Custom finishes are also available.
Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.

Features:

Quietly Beautiful

  • Hyper-quiet—70% quieter than conventional remote ventilators; 66 decibels ambient white noise (about that of a window air conditioner) maintains outdoor quiet and eliminates in-hood motor noise.
  • Low Profile—9" at the highest point, with 7" radiused profile. Restaurant ventilator power, without the industrial fan look.
  • Super Energy Efficient—high CFM output at 1/3 the power of comparable professional-level remote ventilators.
  • Infinitely Variable Motor Speed Control—solid state device gives you 100% control to dial in the exact vent power for the current cooking condition.
  • Maintenance-free—permanently lubricated sealed ball bearings require no upkeep. Thermal overload protection with auto reset, safeguards the system. External rotor construction places the motor at the center of the permanently attached fan wheel for superior cooling, assuring long-life and trouble-free performance.
  • Ultimate Serviceability—in the unlikely event that the systems fails, the Uni-Structure motor/impeller/control assembly is replaced as a unit.

Beautifully Simple

  • Removable Cover for quick access
  • Uni-Structure replaced as a unit
    should system fail
  • Terminal Block with set screws for
    easy, reliable connection
  • Spring Damper seals out cold
  • Extended Flashing for easy installation

Powerfully Quiet

  • Superior design moves air 125%
    more efficiently than other
    professional ventilators. Integral
    fan wheel/motor assembly is
    dynamically balanced on two
    planes virtually eliminating
    referred noise to the range hood.

Dimensions:


Abbaka ventilator motors are from Germany and the ventilators are assembled in the USA.
Please Note: Abbaka products may not be returned after they have been delivered.
Reviews
Search
 
Manufacturers
1 x Door Seal (LH door)
1 x Valve, Pilot - DBL, 1/4" Tube, 1/8"
1 x Thermocouple 30" capillary
1 x Flex tube kit, 18 inch s/s, 3/16 diameter
1 x Safety Valve, Dynasty-Jade oven safety valve, Number 3
1 x Pilot burner, Ovens, Griddles (natural gas or LP)
1 x Remus Teppanyaki Utensil Tool Kit
1 x Replacement Oven Thermostat Kit (includes dial)
1 x Knob (Dial) for Gas Griddle, 100-450 degrees F
1 x Thermometer, Candy or Deep Fryer thermometer
1 x Door Catch Kit for Wolf WKGD ovens
1 x Timer for Wolf and Vulcan convection ovens and steamers (240V)
1 x Heat Deflector Shield (for Tubular Burner)
1 x Bulb, Oven Bulb, oven lamp for Vulcan
1 x Burner Assembly, 18K BTU, Sealed Burner: BACKORDERED
1 x Grate for SCB, Cast Diamond
1 x Safety Valve - 3/8" NPT gas in/out, 1/4 CCT pilot in/out
1 x Burner / Mixer Plate (Air Shutter, 2-5/8 inch OD)
1 x Bulb, Oven Bulb, oven lamp bulb for DGR, DGRS, DGRSC, RJGR
1 x Flash Tube (flash tubes) for Wolf Challenger, XL, Vulcan
1 x Thermostat for Oven (Grizzly series, Cub, etc.)
1 x Three Pocket Bib Apron
1 x Orifice Propane (LP), for DVOR-1535 pilot burner
1 x Salad Spinner SD92
1 x Valve, broiler valve assembly for C36, C45, etc
1 x Liner, Bottom Tray Liner for Fresh O Matic Steamer
1 x Knob for Montague Cooking Equipment,
1 x Grate, Spider, Wolf Range
1 x Tubing, Copper Clad Steel Tubing: 1/4"
1 x Igniter, Broiler Igniter (R series)
1 x Door Handle Bracket (left)
1 x Knob, Chrome, for Montague Range equipment
1 x Grate for ACB, Griddle Plate Accessory
1 x Thermostat for Oven (Wolf Challenger CH, CHSS, CHR)
1 x Open Top Pilot Assembly: 2 burner, RHP
1 x Economy-Deluxe Can Opener
1 x Grate, Front Burner
1 x Pilot Assembly for 2 right hand Open Burners on WOLF Challenger
1 x Orifices, Jets for Hot Top valve, natural gas, 6 pack
1 x Valve with Orifice, for Gas Burner (Challenger, Challenger XL)
1 x Thermostat for Wolf Range Commander Series
1 x Knob (M), for Wolf Challenger Ranges, Broilers, etc.
1 x LP Conversion Kit from NG to LP for HRD4803U
1 x Thermocouple 60" capillary for Montague Ovens
1 x Two Swing Arm Can Openers, Made in USA, Heavy Duty, Red/Red
1 x Orifice holder elbow assembly for thermostat on griddles, ASA, M
2 x Oven Test Thermometer, NSF Certified for Commercial Use
1 x Gasket for burner (Montague Grizzly, M, R, S, 136, VG, etc.)
1 x Oven Thermostat for Montague
1 x Oven Thermostat, 60" capillary, Challenger XL
1 x Thermostat for Oven or Griddle (Montague)
1 x Thermostat for Griddles, Wolf Range, includes dial and bezel
1 x Heat Deflector (only deflector, for SCB)
1 x Valve for burner, offset mount, on Stock Pot Range (SPR)
1 x Caster Sets: Set of 6 stem casters
1 x Knob (dial) for Convection Ovens Timers (early series)
1 x Thermometer, Hanging Refrigerator/Freezer thermometer
1 x Leg 6 inch height, stainless steel for countertop equipment
1 x Igniter, Spark for Dynasty DBQ-30 or DBQ-42 Grills, Side Burners
1 x Knob (Dial) for Thermostat, Challenger series
1 x Regulator, Gas: Natural Gas, 3/4" NPT (Commercial)
1 x Thermocouple 48" capillary for Montague Ovens
1 x Thermostat for Oven (Montague)
1 x Plate, 2-hole top plate, porcelainized
1 x Top Burner Valve with angled inlet
1 x Igniter (Ignitor) for Wolf or Vulcan Convection Ovens
1 x Micro Switch for ignition on Top Burner Valve, Wolf Residential
1 x Logo Emblem, Wolf
1 x Ignition Module for WKG and VC series
1 x Pilot NAT/LP, 2CH2, griddle pilot kit
1 x Orifices, Jets for Griddle valve, natural gas, 6 pack
1 x Door Spring Hinge Assembly for Challenger XL, Left
1 x Pilot assembly for Stock Pot Range, Front (WSPR, VSP, WSPR2)
1 x Leg, 6 inch leg for Wolf Range Commercial (Vulcan), Challenger X
1 x Pastry Brush
1 x Safety Valve, 3/8" gas in/out, for Grizzly Series (Montague)
1 x Thermostat, KXA/KXT, 100-450 deg., TMM/STG/MTG/etc.
1 x Knob, for Char Broilers, Griddles, etc.
1 x Thermostat for Oven, 48 inch capillary, Wolf Challenger CHR, CH
1 x Stainless Steel Mixing Bowl, 13 quart
1 x Gas line Flex Tubing for Wolf, 3/8 inch size, 30 inches long
1 x Regulator, Nat. Gas or Propane, for Dynasty Grills, DBQ/DOBQ/JBQ
1 x Pilot head: for 1/4" Tubing
1 x Oven Door Switch, Leaf Switch
1 x Two Swing Arm Can Openers, Made in USA, Heavy Duty, White/Black
1 x Open Top Pilot Assembly*: 4 burner (Commander, etc.)
1 x Dial, Thermostat Dial, 1 inch protrusion on back (Montague)
1 x Gaskets for burners, 6 pk. (Montague Grizzly, M, R, S, 136, VG,
1 x Oven Thermostat, 48" capillary, Challenger XL
1 x Oven Door Handle, 25 inch length, steel (Montague)
1 x Motor, convection motor assembly for WKGD Ovens, VC ovens
1 x Igniter Wire w/electrode for Dynasty or Jade BBQ (ignitor)
1 x Caster Sets, large stem, set of four (Wolf pre 1992)
1 x Pilot Burner, flame pattern left, natural gas, 1/4 cct
1 x Regulator Assembly, Gas, DGRSC series, Natural gas Or Propane-LP
1 x Salad Spinner SD99
1 x Door Hinge Left for Small Oven (18” wide) on 48” HRG, HRD
1 x Gas Knob for Convection Ovens WKGFS
1 x Dial, Thermostat
1 x Flame Switch for electronic ignition, Wolf Range Challenger etc.
1 x Knob, Chrome, for Wolf or Vulcan Broilers, etc.
1 x Oven Thermostat with Broil (for Wolf Appliance Rxxxx series)
1 x Extendible Match Holder for lighting pilot, Two Pack
1 x Orifices, Jets for top burner valve, propane LP gas, 6 pack
1 x Pilot Burner with Electrode, Thermocouple
1 x Thermostat 175-500 degrees, KX (36" capillary)
1 x Knob, Gas Shut Off Valve
1 x Grate for SCB, Cast Waffle Grate for Char Broilers
1 x Door Hardware: Oven Door Spring for Wolf Challenger etc.
1 x Hot Topping Warmer, squeeze bottles included
1 x Oven Bulb (40 watt)
1 x Tubular Burner, Steel, for SCB Charbroiler Grills
$15,424.24
Manufacturer Info
Abbaka
Other products